We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Seagate

Seagate ST2000NM0023 2TB 7200RPM SAS 128MB 3.5" internal hard drive

SKU CH-1P14-QDNTW

2 TB enterprise SAS hard drive spinning at 7 200 RPM with 128 MB cache

  • 2 TB capacity for large-scale data storage
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 6 Gb/s interface suits enterprise controllers
  • 128 MB cache buffers heavy random I/O
  • Zero hours recorded confirms factory-new condition

2 TB SAS Enterprise Drive

The Seagate Constellation ES.3 ST2000NM0023 is a 3.5-inch internal hard drive with a 2000 GB capacity and a 7200 RPM spindle speed. It connects via a SAS 6Gb/s interface and includes a 128 MB cache buffer. The unit is supplied new with zero powered-on hours.

Built for Servers and Arrays

This drive suits storage servers, RAID arrays and backup appliances that accept 3.5-inch SAS devices. It is not for systems that lack a SAS host bus adapter or backplane. Desktop motherboards and consumer enclosures without SAS support cannot use this drive.

SAS 6Gb/s Interface Decides Fit

The single specification that determines compatibility is the SAS 6Gb/s interface. The drive requires a controller or backplane that speaks the SAS protocol at 6 Gbit/s. Without that connection, the drive will not function.

Highlights

  • 2 TB capacity for large-scale data storage
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 6 Gb/s interface suits enterprise controllers
  • 128 MB cache buffers heavy random I/O
  • Zero hours recorded confirms factory-new condition

Specifications

No published specifications for this item yet.

Questions about this item

Does my system need a SAS 6Gb/s controller to use this ST2000NM0023 drive?

Yes, the drive uses a 3.5" SAS 6Gb/s interface and requires a compatible SAS controller or HBA to operate.

Can I mix this 7200RPM SAS drive with older SAS drives running at 3Gb/s on the same controller?

The drive supports 6Gb/s SAS; when connected to a 3Gb/s backplane or controller it will negotiate down to the slower link speed.

How can I confirm the drive is healthy after installation given it shows zero hours?

Run a SMART self-test and verify the power-on hours counter reads zero, matching the zero-hours condition stated for this unit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.