BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Shenzhen Junxiangcheng Technology Co.,
A 4U rack-mount NAS chassis holding four hot-swap 3.5-inch SATA drives with a 150 W Flex PSU for Mini-ITX boards
This 4U server chassis holds four hot-swap 3.5-inch SATA drive bays and accepts a Mini-ITX motherboard up to 170mm square. It ships with a 150W Flex PSU and a single rear 12025 fan for airflow. The steel frame uses 1.0mm SGCC zinc-coated panels with a sand-grain black finish.
The integrated backplane runs at 6Gb/s SATA III, so every installed drive is capped at that interface speed regardless of the drive's own rating. Hot-swap trays include LED light guides for status indication, but the chassis provides only two front USB 2.0 ports for external connectivity. No additional drive interfaces or PCIe slots are present.
Four bays give enough raw capacity for home storage, private cloud, office AV or distributed storage workloads that fit within four drives. The 150W Flex supply and single 12025 fan limit sustained heavy loads; CPU cooler height must stay below 3.5cm. Builds needing more than four drives, redundant power or higher-wattage components exceed what this enclosure can support.
| Form Factor | 4U |
|---|---|
| Color | Black |
This unit includes four 3.5-inch hot-swap bays that also accept 2.5-inch drives, so a single model covers both drive sizes.
The backplane runs at SATA III 6 Gb/s, letting each installed drive reach the full SATA III transfer ceiling.
It uses a Flex 1U 150 W supply, so the total system draw — motherboard, CPU, four drives and fan — must stay within 150 W.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?