暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Six green DIMM sticks with black heat spreaders and gold contacts

Simmtec, Inc

Simmtec, Inc 12GB 6x2GB DDR3 2000 MHz CL9 240pin 1.65v

SKU CH-1VP2-3EPH4

A 12 GB DDR3 desktop kit running at 2000 MHz with CL9 latency, supplied as six 2 GB 240-pin DIMMs at 1.65 V

  • Capacity2GB
  • CAS LatencyCL9
  • 12 GB total capacity from six matched 2 GB modules
  • DDR3 2000 MHz rated speed for responsive desktop performance
  • CL9 latency timing supports quick data access
  • 240-pin DIMM form factor fits standard desktop slots
  • 65 V operating voltage matches module specification

12 GB DDR3 Kit for Desktop Systems

This kit provides twelve gigabytes of DDR3 memory across six modules, each rated at two gigabytes. The modules operate at 2000 MHz with a CAS latency of CL9 and require 1.65 volts. They use the standard 240-pin DIMM form factor for desktop motherboards.

Suits Enthusiasts Building High-Capacity DDR3 Rigs

Builders who need a large 12 GB configuration on a platform limited to DDR3 will find this six-module kit convenient. Systems restricted to lower voltages or fewer memory slots should look elsewhere, as each module draws 1.65 volts and all six slots must be populated.

Fits Standard 240-Pin DDR3 Motherboards

The modules install directly into any desktop board with six available 240-pin DDR3 slots and support for 1.65-volt operation. Populating every slot leaves no room for future expansion, so the full capacity is available immediately without adding more sticks later.

特長

  • 12 GB total capacity from six matched 2 GB modules
  • DDR3 2000 MHz rated speed for responsive desktop performance
  • CL9 latency timing supports quick data access
  • 240-pin DIMM form factor fits standard desktop slots
  • 65 V operating voltage matches module specification

仕様

Capacity2GB
CAS LatencyCL9

この商品に関する質問

Does my motherboard need to support 1.65 V DDR3 for this 6×2 GB kit to run at 2000 MHz?

Yes. The modules are rated at 1.65 V and 2000 MHz CL9, so the board must supply that voltage and accept DDR3 at that speed for the kit to operate at its specified frequency.

Can I keep my existing DDR3 DIMMs installed alongside these six 2 GB sticks?

Only if the motherboard has enough free 240-pin slots and can run all modules at the same voltage and timing; mixing kits with different voltages or speeds will force the system to the lowest common settings.

How do I confirm the kit is running at 2000 MHz CL9 after installation?

Check the memory frequency and timings in the BIOS or a system-information tool such as CPU-Z; they should report 2000 MHz (PC3-16000) with CAS latency 9 when the kit is operating as specified.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。