我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Six green DIMM sticks with black heat spreaders and gold contacts

Simmtec, Inc

Simmtec, Inc 12GB 6x2GB DDR3 2000 MHz CL9 240pin 1.65v

SKU CH-1VP2-3EPH4

A 12 GB DDR3 desktop kit running at 2000 MHz with CL9 latency, supplied as six 2 GB 240-pin DIMMs at 1.65 V

  • Capacity2GB
  • CAS LatencyCL9
  • 12 GB total capacity from six matched 2 GB modules
  • DDR3 2000 MHz rated speed for responsive desktop performance
  • CL9 latency timing supports quick data access
  • 240-pin DIMM form factor fits standard desktop slots
  • 65 V operating voltage matches module specification

12 GB DDR3 Kit for Desktop Systems

This kit provides twelve gigabytes of DDR3 memory across six modules, each rated at two gigabytes. The modules operate at 2000 MHz with a CAS latency of CL9 and require 1.65 volts. They use the standard 240-pin DIMM form factor for desktop motherboards.

Suits Enthusiasts Building High-Capacity DDR3 Rigs

Builders who need a large 12 GB configuration on a platform limited to DDR3 will find this six-module kit convenient. Systems restricted to lower voltages or fewer memory slots should look elsewhere, as each module draws 1.65 volts and all six slots must be populated.

Fits Standard 240-Pin DDR3 Motherboards

The modules install directly into any desktop board with six available 240-pin DDR3 slots and support for 1.65-volt operation. Populating every slot leaves no room for future expansion, so the full capacity is available immediately without adding more sticks later.

商品特色

  • 12 GB total capacity from six matched 2 GB modules
  • DDR3 2000 MHz rated speed for responsive desktop performance
  • CL9 latency timing supports quick data access
  • 240-pin DIMM form factor fits standard desktop slots
  • 65 V operating voltage matches module specification

商品規格

Capacity2GB
CAS LatencyCL9

商品問答

Does my motherboard need to support 1.65 V DDR3 for this 6×2 GB kit to run at 2000 MHz?

Yes. The modules are rated at 1.65 V and 2000 MHz CL9, so the board must supply that voltage and accept DDR3 at that speed for the kit to operate at its specified frequency.

Can I keep my existing DDR3 DIMMs installed alongside these six 2 GB sticks?

Only if the motherboard has enough free 240-pin slots and can run all modules at the same voltage and timing; mixing kits with different voltages or speeds will force the system to the lowest common settings.

How do I confirm the kit is running at 2000 MHz CL9 after installation?

Check the memory frequency and timings in the BIOS or a system-information tool such as CPU-Z; they should report 2000 MHz (PC3-16000) with CAS latency 9 when the kit is operating as specified.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。