暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular green circuit board, gold edge connector, black controller and NAND chips, silver label, 9.5mm thick

Solidigm

Solidigm D5-P5336 30.72TB E1.L 9.5mm PCIe 4.0 enterprise SSD SBFPFWBV307T001

SKU CH-9V91-W9N0Y MPN SBFPFWBV307T001

30.72 TB enterprise SSD in a 9.5 mm E1.L form factor with PCIe 4.0 interface and 192-layer QLC 3D NAND

  • Form FactorE1.L 9.5mm
  • Capacity30.72TB
  • Memory Components192 L QLC 3D NAND
  • InterfacePCI-Express 4.0
  • MTBF2,000,000 hours
  • Operating Temperature0°C ~ +70°C

Option 30.72TB E1.L

他に 21点の構成を表示
  • 72TB capacity stores massive datasets in one drive
  • E1.L 9.5mm form factor fits dense server chassis
  • PCI-Express 4.0 interface delivers high-throughput data access
  • 2,000,000 hours MTBF supports continuous enterprise operation
  • 192-layer QLC 3D NAND enables cost-efficient high-density storage

Enterprise QLC SSD for read-heavy workloads

The Solidigm D5-P5336 provides 30.72TB of capacity in an E1.L 9.5mm form factor using 192-layer QLC 3D NAND. It connects via PCI-Express 4.0 x4 and is built for data-centre servers that prioritise density and read throughput over write endurance.

Installation in compatible E1.L bays

The drive slides into a standard E1.L 9.5mm slot and secures with the chassis latch; no cables are required. Ensure the backplane supports PCIe 4.0 x4 and that airflow meets the 0°C to +70°C operating range, otherwise thermal throttling or detection failures can occur.

Capacity decides fit for cold-storage tiers

At 30.72TB this single module replaces multiple smaller drives in archive, content-delivery or object-store clusters where sequential reads dominate. Systems needing sustained random writes or higher write-endurance ratings should evaluate alternative media.

特長

  • 72TB capacity stores massive datasets in one drive
  • E1.L 9.5mm form factor fits dense server chassis
  • PCI-Express 4.0 interface delivers high-throughput data access
  • 2,000,000 hours MTBF supports continuous enterprise operation
  • 192-layer QLC 3D NAND enables cost-efficient high-density storage

仕様

BrandSolidigm
SeriesD5-P5336
ModelD5-P5336
Form FactorE1.L 9.5mm
Capacity30.72TB
Memory Components192 L QLC 3D NAND
InterfacePCI-Express 4.0
MTBF2,000,000 hours
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
配送重量0.37 kg
梱包サイズ369 × 120 × 54 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How can I confirm the Solidigm D5-P5336 30.72TB SSD is operating correctly after installation?

Verify the drive appears in your server BIOS or OS disk utility at the full 30.72TB capacity with a PCIe 4.0 x4 link, then run a SMART health check to confirm the 192-layer QLC NAND reports zero media errors and a temperature between 0°C and 70°C.

What accessories are included with the SBFPFWBV307T001 and what must be sourced separately?

The single-pack drive ships as the bare E1.L 9.5mm module only; you must supply a compatible E1.L backplane or carrier, PCIe 4.0 cabling or riser, and any required mounting screws or thermal pads for your specific chassis.

Which capacity version of the D5-P5336 series should I choose for a high-density read-intensive array?

The 30.72TB model provides the highest density in the E1.L 9.5mm form factor using 192-layer QLC 3D NAND, maximising rack space efficiency for read-heavy workloads while delivering a 2,000,000-hour MTBF rating.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。