暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular E3.S 7.5mm SSD with green circuit board and gold edge connector

Solidigm

Solidigm D7-PS1030 1.6TB E3.S 7.5mm PCIe 5.0 enterprise SSD SB5PHA7E016TOP1

SKU CH-51H7-KSE27 MPN SB5PHA7E016TOP1

E3.S 7.5mm PCIe 5.0 enterprise SSD with 1.6TB 176L TLC NAND, 14500 MB/s reads and 3 DWPD endurance

  • Form FactorE3.S 7.5mm
  • Capacity1.6TB
  • Memory Components176L TLC 3D NAND
  • InterfacePCI-Express 5.0
  • Max Sequential ReadUp to 14500 MBps
  • Max Sequential WriteUp to 4100 MBps

Option 1.6TB E3.S Opal

他に 12点の構成を表示
  • 6TB capacity with 176L TLC 3D NAND for high-density storage
  • PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read speed
  • 2350000 IOPS random read handles intensive enterprise workloads
  • 3 DWPD endurance and 8.7 PBW support sustained write-heavy applications
  • E3.S 7.5mm form factor fits dense server deployments

Solidigm D7-PS1030 1.6TB Enterprise SSD

The Solidigm D7-PS1030 is a 1.6TB enterprise solid state drive built for data-centre servers. It uses an E3.S 7.5mm form factor and a PCI-Express 5.0 x4 interface with 176L TLC 3D NAND. Sequential reads reach up to 14500 MBps and writes up to 4100 MBps.

Suits high-throughput server workloads.

This drive targets storage arrays and compute nodes that demand sustained random performance of 2350000 read IOPS and 350000 write IOPS. It carries a 3 DWPD endurance rating and Opal security. Builders using standard desktop motherboards or laptop slots cannot install the E3.S form factor.

PCIe 5.0 x4 interface decides compatibility

The controller requires a PCI-Express 5.0 x4 backplane or riser to deliver the rated throughput. Systems limited to PCIe 4.0 or 3.0 will restrict bandwidth. Verify the server chassis accepts E3.S 7.5mm drives before purchase.

特長

  • 6TB capacity with 176L TLC 3D NAND for high-density storage
  • PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read speed
  • 2350000 IOPS random read handles intensive enterprise workloads
  • 3 DWPD endurance and 8.7 PBW support sustained write-heavy applications
  • E3.S 7.5mm form factor fits dense server deployments

仕様

BrandSolidigm
ModelD7-PS1030
Part NumberSB5PHA7E016TOP1
Form FactorE3.S 7.5mm
Capacity1.6TB
Memory Components176L TLC 3D NAND
InterfacePCI-Express 5.0
Max Sequential ReadUp to 14500 MBps
Max Sequential WriteUp to 4100 MBps
4KB Random Read2350000 IOPS (4K Blocks)
4KB Random Write350000 IOPS (4K Blocks)
Endurance3 DWPD / 8.7 PBW
MTBF2,500,000 hours
SecurityOpal
Power Consumption (Idle)5W
Power Consumption (Active)17W
Operating Temperature0°C to 77°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight110g +/- 10g
配送重量0.17 kg
梱包サイズ140 × 110 × 17 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What server slot do I need to install this E3.S 7.5mm drive?

The drive fits an E3.S 7.5mm hot-plug bay with a PCIe 5.0 x4 electrical connection.

Will my PCIe 4.0 backplane limit the 14500 MBps sequential read?

Yes, a PCIe 4.0 backplane caps the link at 4.0 speeds, so the 14500 MBps read and 4100 MBps write will not be reached.

Which SMART attribute confirms the 3 DWPD endurance rating is being honoured?

Monitor the "Percentage Used" attribute; it increments as the 8.7 PBW write budget is consumed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。