暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular U.2 15mm enterprise SSD with metal housing and label

Solidigm

Solidigm SB5PH27X038TOF1 D7-PS1010 3.84TB U.2 15mm PCIe 5.0 enterprise SSD

SKU CH-2AHK-J2RC6 MPN SB5PH27X038TOF1

Enterprise U.2 15mm SSD with 3.84TB 176L TLC NAND, PCIe 5.0 x4, 14500 MBps read, 3100000 IOPS random read, FIPS security and 1 DWPD endurance

  • Form FactorU.2 15mm
  • Capacity3.84TB
  • Memory Components176L TLC 3D NAND
  • InterfacePCI-Express 5.0
  • Max Sequential ReadUp to 14500 MBps
  • Max Sequential WriteUp to 8200 MBps

Option 3.84TB U.2 FIPS

他に 20点の構成を表示
  • 84 TB capacity supports large datasets
  • PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read
  • 176L TLC 3D NAND enables 3100000 IOPS random read
  • FIPS security meets strict compliance requirements
  • 1 DWPD endurance rating provides 7 PBW total writes

Solidigm D7-PS1010 3.84TB U.2 drive

The Solidigm D7-PS1010 is a 3.84TB enterprise solid-state drive built for data-centre servers. It uses a U.2 15mm form factor and a PCI-Express 5.0 interface with 176L TLC 3D NAND. The drive delivers sequential reads up to 14500 MBps and writes up to 8200 MBps.

Suited for high-throughput storage arrays.

This drive suits storage arrays that demand sustained random performance with 3100000 IOPS read and 315000 IOPS write at 4KB blocks. It is not for systems limited to PCIe 4.0 or 3.0 slots, nor for chassis that only accept 7mm U.2 modules. The 1 DWPD endurance rating also means it is not for write-heavy workloads exceeding 7 PBW.

PCIe 5.0 x4 interface decides compatibility

The single specification that decides fit is the PCI-Express 5.0 x4 interface. The host backplane and CPU root complex must support PCIe 5.0 to reach the rated 14500 MBps sequential read speed. Without that link width and generation the drive will negotiate down and not deliver its rated throughput.

特長

  • 84 TB capacity supports large datasets
  • PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read
  • 176L TLC 3D NAND enables 3100000 IOPS random read
  • FIPS security meets strict compliance requirements
  • 1 DWPD endurance rating provides 7 PBW total writes

仕様

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PH27X038TOF1
Form FactorU.2 15mm
Capacity3.84TB
Memory Components176L TLC 3D NAND
InterfacePCI-Express 5.0
Max Sequential ReadUp to 14500 MBps
Max Sequential WriteUp to 8200 MBps
4KB Random Read3100000 IOPS (4K Blocks)
4KB Random Write315000 IOPS (4K Blocks)
Endurance1 DWPD / 7 PBW
MTBF2,500,000 hours
SecurityFIPS
Power Consumption (Idle)5W
Power Consumption (Active)19W
Operating Temperature0°C to 77°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight140g +/- 10g
配送重量0.17 kg
梱包サイズ140 × 110 × 17 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my server need a U.2 15mm bay and a PCIe 5.0 x4 backplane to install this D7-PS1010?

Yes, the drive uses a U.2 15mm form factor and a PCI-Express 5.0 x4 interface, so the chassis must provide a matching bay and backplane.

Will this 3.84TB drive work in a system that only has PCIe 4.0 slots?

The SSD connects via PCI-Express 5.0 x4 and will operate at PCIe 4.0 speeds if the slot is limited to that generation.

How can I verify the D7-PS1010 is performing correctly after installation?

Check SMART health for temperature within 0°C to 77°C, confirm the link runs at PCIe 5.0 x4, and run a benchmark to see sequential reads near 14500 MBps and writes near 8200 MBps.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。