저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular U.2 15mm enterprise SSD with metal housing and label

Solidigm

Solidigm SB5PH27X038TOF1 D7-PS1010 3.84TB U.2 15mm PCIe 5.0 enterprise SSD

SKU CH-2AHK-J2RC6 MPN SB5PH27X038TOF1

Enterprise U.2 15mm SSD with 3.84TB 176L TLC NAND, PCIe 5.0 x4, 14500 MBps read, 3100000 IOPS random read, FIPS security and 1 DWPD endurance

  • Form FactorU.2 15mm
  • Capacity3.84TB
  • Memory Components176L TLC 3D NAND
  • InterfacePCI-Express 5.0
  • Max Sequential ReadUp to 14500 MBps
  • Max Sequential WriteUp to 8200 MBps

Option 3.84TB U.2 FIPS

구성 20개 더 보기
  • 84 TB capacity supports large datasets
  • PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read
  • 176L TLC 3D NAND enables 3100000 IOPS random read
  • FIPS security meets strict compliance requirements
  • 1 DWPD endurance rating provides 7 PBW total writes

Solidigm D7-PS1010 3.84TB U.2 drive

The Solidigm D7-PS1010 is a 3.84TB enterprise solid-state drive built for data-centre servers. It uses a U.2 15mm form factor and a PCI-Express 5.0 interface with 176L TLC 3D NAND. The drive delivers sequential reads up to 14500 MBps and writes up to 8200 MBps.

Suited for high-throughput storage arrays.

This drive suits storage arrays that demand sustained random performance with 3100000 IOPS read and 315000 IOPS write at 4KB blocks. It is not for systems limited to PCIe 4.0 or 3.0 slots, nor for chassis that only accept 7mm U.2 modules. The 1 DWPD endurance rating also means it is not for write-heavy workloads exceeding 7 PBW.

PCIe 5.0 x4 interface decides compatibility

The single specification that decides fit is the PCI-Express 5.0 x4 interface. The host backplane and CPU root complex must support PCIe 5.0 to reach the rated 14500 MBps sequential read speed. Without that link width and generation the drive will negotiate down and not deliver its rated throughput.

주요 특징

  • 84 TB capacity supports large datasets
  • PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read
  • 176L TLC 3D NAND enables 3100000 IOPS random read
  • FIPS security meets strict compliance requirements
  • 1 DWPD endurance rating provides 7 PBW total writes

사양

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PH27X038TOF1
Form FactorU.2 15mm
Capacity3.84TB
Memory Components176L TLC 3D NAND
InterfacePCI-Express 5.0
Max Sequential ReadUp to 14500 MBps
Max Sequential WriteUp to 8200 MBps
4KB Random Read3100000 IOPS (4K Blocks)
4KB Random Write315000 IOPS (4K Blocks)
Endurance1 DWPD / 7 PBW
MTBF2,500,000 hours
SecurityFIPS
Power Consumption (Idle)5W
Power Consumption (Active)19W
Operating Temperature0°C to 77°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight140g +/- 10g
배송 무게0.17 kg
포장 크기140 × 110 × 17 mm

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Does my server need a U.2 15mm bay and a PCIe 5.0 x4 backplane to install this D7-PS1010?

Yes, the drive uses a U.2 15mm form factor and a PCI-Express 5.0 x4 interface, so the chassis must provide a matching bay and backplane.

Will this 3.84TB drive work in a system that only has PCIe 4.0 slots?

The SSD connects via PCI-Express 5.0 x4 and will operate at PCIe 4.0 speeds if the slot is limited to that generation.

How can I verify the D7-PS1010 is performing correctly after installation?

Check SMART health for temperature within 0°C to 77°C, confirm the link runs at PCIe 5.0 x4, and run a benchmark to see sequential reads near 14500 MBps and writes near 8200 MBps.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.