저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Solidigm

Solidigm D7-PS1010 1.92TB U.2 15mm PCIe 5.0 enterprise SSD SB5PH27X019TOP1

SKU CH-3QKD-C7M28 MPN SB5PH27X019TOP1

U.2 15mm PCIe 5.0 enterprise SSD delivering 1.92TB capacity with 14500 MBps sequential read, 4100 MBps write and 1 DWPD endurance

  • Form FactorU.2 15mm
  • Capacity1.92TB
  • Memory Components176L TLC 3D NAND
  • InterfacePCI-Express 5.0
  • Max Sequential ReadUp to 14500 MBps
  • Max Sequential WriteUp to 4100 MBps
  • Delivers up to 14500 MBps sequential read for rapid data access
  • Sustains 2750000 IOPS random read to accelerate transaction-heavy workloads
  • Handles 380000 IOPS random write for consistent mixed-use performance
  • Endures 28 PBW at 1 DWPD for long service life
  • Secures data with Opal encryption on 176L TLC 3D NAND

Capacity and interface

The Solidigm D7-PS1010 is a 1.92TB enterprise SSD built on 176L TLC 3D NAND with a PCIe 5.0 x4 interface. It delivers up to 14500 MBps sequential read and 4100 MBps sequential write alongside 2750000 IOPS random read and 380000 IOPS random write. The drive is rated for 1 DWPD endurance and 28 PBW total bytes written.

Physical installation

The U.2 15mm form factor fits standard 2.5in U.2 bays and backplanes that accept a 15mm z-height; verify the bay depth before fitting. Active power draw reaches 23W, so ensure the backplane or cabling can supply the required current without voltage drop. The drive weighs 120g and operates from 0°C to 77°C.

Pre-order checks

Confirm the server or storage platform supports PCIe 5.0 signalling over U.2 and that the BIOS or firmware can boot from this device if required. Opal security is supported for hardware-based encryption management. The MTBF is 2500000 hours and the drive meets 1000 G shock plus 2.17 GRMS operating vibration specifications.

주요 특징

  • Delivers up to 14500 MBps sequential read for rapid data access
  • Sustains 2750000 IOPS random read to accelerate transaction-heavy workloads
  • Handles 380000 IOPS random write for consistent mixed-use performance
  • Endures 28 PBW at 1 DWPD for long service life
  • Secures data with Opal encryption on 176L TLC 3D NAND

사양

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PH27X019TOP1
Form FactorU.2 15mm
Capacity1.92TB
Memory Components176L TLC 3D NAND
InterfacePCI-Express 5.0
Max Sequential ReadUp to 14500 MBps
Max Sequential WriteUp to 4100 MBps
4KB Random Read2750000 IOPS (4K Blocks)
4KB Random Write380000 IOPS (4K Blocks)
Endurance1 DWPD / 28 PBW
MTBF2,500,000 hours
SecurityOpal
Power Consumption (Idle)5W
Power Consumption (Active)23W
Operating Temperature0°C to 77°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight120g +/- 10g
배송 무게0.16 kg
포장 크기128 × 102 × 25 mm

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I verify the Solidigm D7-PS1010 is delivering its rated 2750000 IOPS random read performance after installation?

Run a 4K random read benchmark such as FIO or CrystalDiskMark on the U.2 15mm drive; sustained results near 2750000 IOPS confirm the PCIe 5.0 x4 link and 176L TLC NAND are operating as specified.

What ships with the SB5PH27X019TOP1 and what must I source separately for a server deployment?

The single pack contains only the 1.92TB U.2 15mm SSD; you must supply a compatible 2.5-inch U.2 backplane or carrier, PCIe 5.0 cabling, and any required mounting screws for your chassis.

Which capacity and endurance tier of the D7-PS1010 series should I select for a mixed read-write workload needing 28 PBW?

The 1.92TB model provides exactly 1 DWPD and 28 PBW total bytes written, matching the stated endurance target for balanced enterprise workloads.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.