저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular silver E3.S 7.5mm SSD with gold edge connector and label

Solidigm

Solidigm D7-PS1010 15.36TB E3.S 7.5mm PCIe 5.0 enterprise SSD SB5PHA7X153TOF1

SKU CH-PKQR-1H3ZY MPN SB5PHA7X153TOF1

E3.S 7.5mm drive stores 15.36TB on 176L TLC NAND with PCIe 5.0 speeds up to 14500 MBps read and 9300 MBps write

  • Form FactorE3.S 7.5mm
  • Capacity15.36TB
  • Memory Components176L TLC 3D NAND
  • InterfacePCI-Express 5.0
  • Max Sequential ReadUp to 14500 MBps
  • Max Sequential WriteUp to 9300 MBps

Option 15.36TB E3.S FIPS

구성 20개 더 보기
  • Massive 15.36TB capacity consolidates data onto fewer drives
  • PCIe 5.0 x4 interface delivers up to 14500 MB/s sequential read speed
  • 176L TLC 3D NAND enables 2750000 random read IOPS for transactional workloads
  • FIPS-certified security protects sensitive data at rest
  • 1 DWPD endurance with 28 PBW supports sustained write-intensive applications

High-capacity enterprise SSD

The Solidigm D7-PS1010 delivers 15.36TB of storage in an E3.S 7.5mm form factor built for PCIe 5.0 servers. It uses 176L TLC 3D NAND rated for 1 DWPD endurance and 28 PBW total bytes written. FIPS security compliance suits regulated data-centre workloads.

E3.S 7.5mm server mounting

The 7.5mm E3.S design fits hot-plug drive bays in 1U and 2U chassis without adapters. A 120g weight keeps tray loading light while the x4 edge connector provides full PCIe 5.0 bandwidth. No cabling is required beyond the backplane slot.

23W active power ceiling

Typical active draw reaches 23W while idle power sits at 5W. The controller operates from 0°C to 77°C with an MTBF of 2,500,000 hours. Shock tolerance is rated at 1,000 G and vibration at 2.17 GRMS operating.

주요 특징

  • Massive 15.36TB capacity consolidates data onto fewer drives
  • PCIe 5.0 x4 interface delivers up to 14500 MB/s sequential read speed
  • 176L TLC 3D NAND enables 2750000 random read IOPS for transactional workloads
  • FIPS-certified security protects sensitive data at rest
  • 1 DWPD endurance with 28 PBW supports sustained write-intensive applications

사양

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PHA7X153TOF1
Form FactorE3.S 7.5mm
Capacity15.36TB
Memory Components176L TLC 3D NAND
InterfacePCI-Express 5.0
Max Sequential ReadUp to 14500 MBps
Max Sequential WriteUp to 9300 MBps
4KB Random Read2750000 IOPS (4K Blocks)
4KB Random Write380000 IOPS (4K Blocks)
Endurance1 DWPD / 28 PBW
MTBF2,500,000 hours
SecurityFIPS
Power Consumption (Idle)5W
Power Consumption (Active)23W
Operating Temperature0°C to 77°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight120g +/- 10g
배송 무게0.17 kg
포장 크기140 × 110 × 17 mm

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What throughput ceiling does the PCIe 5.0 x4 interface impose on this D7-PS1010 in practice?

The PCIe 5.0 x4 link caps sequential throughput at the drive's rated 14500 MBps read and 9300 MBps write, with 2750000 IOPS random read and 380000 IOPS random write.

Which server bay and tooling does the E3.S 7.5mm form factor require for this 15.36TB unit?

It fits a standard E3.S 7.5mm hot-plug bay; the drive weighs 120g +/- 10g and uses the bay's native latch, so no separate brackets or screws are needed.

What is the correct insertion sequence to avoid damaging the PCIe 5.0 edge connector on this drive?

Align the drive with the bay guide rails, push straight in until the connector seats fully, then engage the built-in latch; forcing it at an angle can bend the high-speed contacts.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.