暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board M.2 2280 SATA SSD with black label

SUPER TALENT

SUPER TALENT DX3 256GB M.2 SATA internal SSD

SKU CH-C1FK-BZRTS

A 256 GB M.2 SATA internal SSD with 3D TLC NAND delivering up to 480 MB/s read and 400 MB/s write speeds

  • 256 GB capacity fits large game libraries and media collections
  • Sequential read up to 480 MB/s loads applications quickly
  • Sequential write up to 400 MB/s saves large files fast
  • M.2 2280 form factor installs in slim laptops and desktops
  • 1500 G shock rating protects data during drops and transport

SATA M.2 2280 256 GB internal SSD

This SUPER TALENT DX3 drive delivers 256 GB of storage in an M.2 2280 form factor using a SATA interface. It fits laptops and desktops with an M.2 SATA slot and draws power from a 3.3 V rail. Sequential reads reach up to 480 MB/s and writes up to 400 MB/s.

Suits SATA-only M.2 slots; not for PCIe-only slots

Builders whose motherboard provides an M.2 socket wired for SATA can use this drive directly. Systems with M.2 slots that support only PCIe signalling will not recognise the device. Buyers needing higher sequential throughput or larger capacities should consider other options.

3D TLC NAND with 1500 G shock rating

The drive uses 3D TLC flash memory and is rated for 1500 G operating shock and 16 G operating vibration. Access time is 0.2 ms and the module measures 22.0 x 80.0 x 3.5 mm.

特長

  • 256 GB capacity fits large game libraries and media collections
  • Sequential read up to 480 MB/s loads applications quickly
  • Sequential write up to 400 MB/s saves large files fast
  • M.2 2280 form factor installs in slim laptops and desktops
  • 1500 G shock rating protects data during drops and transport

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 2280 M.2 drive fit in a slot limited to 3.5 mm thickness?

Yes, the drive measures 22.0 x 80.0 x 3.5 mm, so it matches the standard 2280 footprint and stays within a 3.5 mm height limit.

Does the SATA3 interface need a separate power cable during installation?

No, the drive draws power directly from the M.2 socket at 3.3V ±5%; no extra power cable is required.

How long before the 3D TLC NAND might need replacement under typical write loads?

The 3D TLC NAND is rated for standard endurance; with 256 GB capacity and sequential writes up to 400 MB/s, typical consumer workloads last several years before wear becomes a concern.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。