저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

SUPER TALENT

SUPER TALENT DX3 256GB M.2 SATA internal SSD

SKU CH-C1FK-BZRTS

A 256 GB M.2 SATA internal SSD with 3D TLC NAND delivering up to 480 MB/s read and 400 MB/s write speeds

  • 256 GB capacity fits large game libraries and media collections
  • Sequential read up to 480 MB/s loads applications quickly
  • Sequential write up to 400 MB/s saves large files fast
  • M.2 2280 form factor installs in slim laptops and desktops
  • 1500 G shock rating protects data during drops and transport

SATA M.2 2280 256 GB internal SSD

This SUPER TALENT DX3 drive delivers 256 GB of storage in an M.2 2280 form factor using a SATA interface. It fits laptops and desktops with an M.2 SATA slot and draws power from a 3.3 V rail. Sequential reads reach up to 480 MB/s and writes up to 400 MB/s.

Suits SATA-only M.2 slots; not for PCIe-only slots

Builders whose motherboard provides an M.2 socket wired for SATA can use this drive directly. Systems with M.2 slots that support only PCIe signalling will not recognise the device. Buyers needing higher sequential throughput or larger capacities should consider other options.

3D TLC NAND with 1500 G shock rating

The drive uses 3D TLC flash memory and is rated for 1500 G operating shock and 16 G operating vibration. Access time is 0.2 ms and the module measures 22.0 x 80.0 x 3.5 mm.

주요 특징

  • 256 GB capacity fits large game libraries and media collections
  • Sequential read up to 480 MB/s loads applications quickly
  • Sequential write up to 400 MB/s saves large files fast
  • M.2 2280 form factor installs in slim laptops and desktops
  • 1500 G shock rating protects data during drops and transport

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

Will the 2280 M.2 drive fit in a slot limited to 3.5 mm thickness?

Yes, the drive measures 22.0 x 80.0 x 3.5 mm, so it matches the standard 2280 footprint and stays within a 3.5 mm height limit.

Does the SATA3 interface need a separate power cable during installation?

No, the drive draws power directly from the M.2 socket at 3.3V ±5%; no extra power cable is required.

How long before the 3D TLC NAND might need replacement under typical write loads?

The 3D TLC NAND is rated for standard endurance; with 256 GB capacity and sequential writes up to 400 MB/s, typical consumer workloads last several years before wear becomes a concern.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.