暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SXDOOL

SXDOOL EVERFLOW R128015DH 12V .32A 80mm 15mm 4-wire CPU fan

SKU CH-V9P9-0TA2A

An 80 mm square, 15 mm thick CPU fan with a 4-wire PWM connector running at 12 V and 0.32 A

  • 12 V .32 A four-wire PWM speed control
  • 80 mm square frame fits tight CPU cooler builds
  • 15 mm slim profile clears low-profile heatsinks
  • 4-pin connector enables motherboard fan-curve management
  • EVERFLOW R128015DH model built for continuous 12 V operation

Compact 80 mm CPU cooler

The SXDOOL EVERFLOW R128015DH is an 80 mm square fan measuring 15 mm thick, built for CPU air cooling in tight spaces. It runs on a 12 V supply drawing 0.32 A and connects through a standard 4-wire PWM header. This unit suits builders assembling small-form-factor or low-profile systems where height clearance is limited.

4-pin PWM integration

The four-wire connector plugs directly into a motherboard CPU fan header, allowing the board to control speed automatically based on temperature. No separate fan controller or adapter cable is required, and the 12 V 0.32 A draw keeps the load on the header well within typical limits. The 8015 frame fits standard 80 mm mounting holes found on many low-profile heatsinks.

Steady thermal dissipation

At constant 12 V 0.32 A operation the fan delivers continuous airflow across the heatsink fins without the ramp-up and spin-down cycles seen in short bursts. This steady state keeps CPU temperatures stable during prolonged workloads such as rendering or compiling. The 15 mm thickness provides enough static pressure for dense fin stacks while remaining quiet at sustained speeds.

特長

  • 12 V .32 A four-wire PWM speed control
  • 80 mm square frame fits tight CPU cooler builds
  • 15 mm slim profile clears low-profile heatsinks
  • 4-pin connector enables motherboard fan-curve management
  • EVERFLOW R128015DH model built for continuous 12 V operation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What is the maximum current draw of the R128015DH fan under continuous operation?

The fan is rated at 0.32 A on a 12 V supply, so sustained use will not exceed that current.

What are the physical dimensions of the R128015DH that determine case clearance?

It measures 80 mm by 80 mm by 15 mm, matching the standard 8015 form factor.

What motherboard header is required to run the 4-wire R128015DH?

A standard 4-pin PWM header supplies both power and speed control for this fan.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。