暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SXDOOL

SXDOOL FD128032HB 8032 12V 0.37A 80*80*32 mm CPU cooler

SKU CH-63ZW-DGR2K

An 80 mm square copper-and-aluminium heatsink with a 12 V 0.37 A axial fan for CPU cooling in a computer case

  • Efficient 12 V operation draws only 0.37 A
  • Compact 80 mm square footprint fits tight cases
  • Copper and aluminium heatsink moves heat from the CPU
  • 32 mm slim profile clears low-profile motherboard layouts
  • Light 0.15 kg unit adds minimal load to the board

Compact 80 mm copper-aluminium cooler

The SXDOOL FD128032HB is a low-profile air cooler built for standard computer cases. Its 80 by 80 by 32 mm footprint suits tight builds where full-height towers cannot fit. The unit targets 12 V systems drawing 0.37 A, making it a straightforward drop-in for compatible CPU sockets.

Copper core with aluminium fins

A copper base transfers heat into aluminium fins driven by an axial fan. The combined metal construction keeps weight to 0.15 kg while maintaining structural rigidity. Mounting hardware is included, so installation proceeds without sourcing extra brackets or fasteners.

Replaces stock coolers in space-constrained chassis

This cooler upgrades factory coolers that run loud or throttle under sustained loads. The improvement is most noticeable in small-form-factor or office PCs where clearance is limited. Builders needing higher thermal capacity for overclocking or multi-core workloads should consider larger solutions.

特長

  • Efficient 12 V operation draws only 0.37 A
  • Compact 80 mm square footprint fits tight cases
  • Copper and aluminium heatsink moves heat from the CPU
  • 32 mm slim profile clears low-profile motherboard layouts
  • Light 0.15 kg unit adds minimal load to the board

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What power connector does the FD128032HB use and what current does it draw?

The cooler runs on a 12 V supply and draws 0.37 A, so it connects to a standard 12 V fan header on the motherboard.

How much clearance does the 80×80×32 mm heatsink need inside the case?

The unit measures 80 mm wide, 80 mm deep and 32 mm tall, so allow at least that much space around the CPU socket and check for RAM or VRM heatsink interference.

How is the FD128032HB mounted and what step is often missed?

It uses the supplied mounting hardware to clamp the copper-and-aluminium heatsink onto the CPU; the step many forget is applying a thin, even layer of thermal paste before tightening the screws.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。