暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Square grey silicone thermal pad 100 by 100 by 3.0 mm

UPSIREN

UPSIREN OEM Thermal Pad 21W/mK 100x100x3.0mm 23g

SKU CH-6E3V-9KTK3

High-conductivity silicone pad measuring 100 x 100 x 3.0 mm with 21 W/mK rating for CPU, GPU and LED cooling

  • Volume / Net Weight23g
  • Thermal Conductivity21W/mk
  • Long Term Operating Temperature-40 to 200 C
  • FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Option 100 x 100 x 3.0 mm

  • High conductivity at 21W/mK for efficient heat transfer
  • Soft 30-degree pad compresses to fit chips tightly
  • Non-conductive silicone prevents electrical shorts safely
  • Operates from -40 to 200°C without melting
  • Reusable pad with natural viscosity eases assembly

High-conductivity silicone thermal pad

This UPSIREN OEM pad measures 100 by 100 by 3.0 millimetres and weighs 23 grams. It carries a rated thermal conductivity of 21 W/mK and a long-term operating range of minus 40 to 200 degrees Celsius. The silicone material is non-conductive, non-corrosive, non-curing and non-toxic. Natural viscosity lets it seat easily and be reused.

Builders filling larger gaps on GPUs.

The 3.0 millimetre thickness suits interfaces where a standard paste layer is too thin and a thinner pad leaves voids. Users needing a sub-millimetre bond line or a liquid metal compound should choose a different format. The pad’s 30-degree shore hardness gives a soft, compressible feel that conforms to uneven surfaces without excessive pressure.

Steady heat transfer across the full temperature

Rated conductivity holds from minus 40 up to 200 degrees Celsius without melting or curing, so sustained loads do not degrade the interface. Non-curing silicone avoids pump-out over thermal cycles, keeping contact pressure stable. Electrical insulation remains intact at high temperature, preventing shorts on exposed PCB traces.

特長

  • High conductivity at 21W/mK for efficient heat transfer
  • Soft 30-degree pad compresses to fit chips tightly
  • Non-conductive silicone prevents electrical shorts safely
  • Operates from -40 to 200°C without melting
  • Reusable pad with natural viscosity eases assembly

仕様

BrandUPSIREN
SeriesOEM
Model21W
Volume / Net Weight23g
Thermal Conductivity21W/mk
Long Term Operating Temperature-40 to 200 C
FeaturesNon-Corrosive, Non-Curing & Non-Toxi

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What surface area must the heatsink or component cover to use the full 100x100mm pad?

The pad measures 100 by 100 millimetres, so the mating surface should be at least that large to utilise the entire piece.

Will the 3.0mm thickness and 30-degree hardness still compress properly against a legacy GPU or CPU with uneven surfaces?

At 3.0 millimetres thick and 30 degrees hardness the material is soft and compressible, allowing it to conform to irregular gaps on older chips.

How can I verify the pad is performing at its rated 21 W/mK conductivity once installed?

Monitor component temperatures under load; a drop toward the expected thermal resistance for 21 W/mK material indicates the pad is working as intended.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。