Vertical Cable
Vertical Cable 12G SAS/SATA RAID Controller SAS 3008 2x SFF-8643
PCIe 3.0 RAID controller with dual SFF-8643 ports delivers 12 Gb/s SAS and SATA connectivity and supports RAID 0, 1, 1E and 10
- 12 Gb/s SAS 3.0 throughput from Broadcom SAS 3008 controller
- PCIe 3.0 x8 lane interface for high-bandwidth host connection
- Two SFF-8643 Mini SAS ports supporting up to eight drives
- Hardware RAID 0, 1, 1E and 10 via IR firmware mode
- Direct replacement for SAS 9311-8I in compatible systems
Controller and Compatibility
This Vertical Cable RAID controller uses Broadcom's SAS 3008 chip to provide eight internal lanes through two SFF-8643 ports. It connects via a PCIe 3.0 x8 slot and supports SAS and SATA drives at up to 12Gb/s. The card operates in IR mode with RAID 0, 1, 1E and 10 and is compatible with the SAS 9311-8I. Driver installation is required using the supplied optical disc.
Thermals and Power
The board draws power solely from the PCIe slot and has no onboard fan. Under normal operation the controller runs at typical HBA temperatures for a server chassis with directed airflow. No external power connectors are present and acoustic output is limited to the system fans moving air across the heatsink.
Sustained Load Behaviour
During continuous rebuild or parity operations the SAS 3008 maintains 12Gb/s throughput per lane without throttling. The IR firmware manages queue depth across all eight channels to keep latency consistent. Write-heavy RAID 10 workloads saturate the PCIe 3.0 x8 link before the controller becomes a bottleneck.
特長
- 12 Gb/s SAS 3.0 throughput from Broadcom SAS 3008 controller
- PCIe 3.0 x8 lane interface for high-bandwidth host connection
- Two SFF-8643 Mini SAS ports supporting up to eight drives
- Hardware RAID 0, 1, 1E and 10 via IR firmware mode
- Direct replacement for SAS 9311-8I in compatible systems
仕様
この商品の仕様はまだ公開されていません。
この商品に関する質問
How do I install the Vertical Cable SAS 3008 controller and what step is often missed?
Insert the card into a PCIe 3.0 x8 slot, connect drives to the two SFF-8643 ports, then install the driver from the supplied optical disc; the driver step is the one most often skipped.
What maintenance or replacement will the controller need later?
The controller has no battery-backed cache or moving parts, so no scheduled maintenance is required; only the optical-disc driver may need updating if the operating system changes.
What limit appears first under sustained use on this RAID card?
Each SFF-8643 port carries four lanes at 12 Gb/s, so the combined throughput ceiling of the two ports is the first bottleneck during heavy sustained I/O.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
