暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Thin green circuit board with black controller and silver label, M.2 2280 form factor

XPG

XPG GAMMIX S60 Blade AGAMMIXS60-1T-CS 1TB internal SSD

SKU CH-936Y-NPY4X MPN AGAMMIXS60-1T-CS

M.2 2280 1TB NVMe drive with PCIe Gen4 x4 interface and read speeds up to 5000MB/s on PC or 4600MB/s on PS5

  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D NAND
  • InterfacePCIe Gen4 x4
  • ProtocolNVMe 1.4

Options 1TB

  • Up to 5,000 MB/s read on PC with PCIe Gen4 x4
  • Sustained 4,200 MB/s write for large file transfers
  • 4,600 MB/s read on PS5 for faster game loads
  • 5 million hour MTBF and 1500G shock resistance for durability
  • Operates 0 °C to 70 °C and stores at -40 °C to 85 °C

Capacity and form factor

The XPG GAMMIX S60 Blade is an M.2 2280 internal SSD with a 1TB capacity. It uses 3D NAND components and connects through a PCIe Gen4 x4 interface. The drive follows the NVMe 1.4 protocol for consumer workloads.

Compatibility and use cases

This drive works with PS5 consoles and with PC or laptop platforms that provide an M.2 slot wired for PCIe Gen4. Sequential read reaches up to 4,600MB/s on PS5 and up to 5,000MB/s on PC, while write speeds reach up to 4,200MB/s. Systems limited to older PCIe generations will not achieve the rated throughput.

Deciding specification

The PCIe Gen4 x4 interface combined with NVMe 1.4 support determines whether this SSD can deliver its rated 5,000MB/s read and 4,200MB/s write performance. Verify that the host platform provides a Gen4 M.2 slot before purchase.

特長

  • Up to 5,000 MB/s read on PC with PCIe Gen4 x4
  • Sustained 4,200 MB/s write for large file transfers
  • 4,600 MB/s read on PS5 for faster game loads
  • 5 million hour MTBF and 1500G shock resistance for durability
  • Operates 0 °C to 70 °C and stores at -40 °C to 85 °C

仕様

BrandXPG
SeriesGAMMIX S60 Blade
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfacePCIe Gen4 x4
ProtocolNVMe 1.4
Max Sequential ReadRead speed up to 4,600MB/s (PS5)
Max Sequential WriteUp to 4200 MBps
MTBF1,500,000 hours
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1500G
配送重量0.02 kg
梱包サイズ128 × 102 × 16 mm

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my motherboard need an M.2 2280 slot with PCIe Gen4 x4 support to use this drive?

Yes, the drive requires an M.2 2280 slot that provides a PCIe Gen4 x4 electrical connection for full NVMe 1.4 operation.

Will this SSD still operate if I install it in a system that only has PCIe Gen3 M.2 slots?

The drive is backward compatible and will function at PCIe Gen3 speeds, though sequential read and write rates will be limited to the Gen3 ceiling.

How can I confirm the SSD is delivering its rated sequential read speed of up to 4600 MB/s on a PS5?

Run the PS5 built-in storage speed test after installation; a result approaching 4600 MB/s indicates the drive is performing as intended.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。