暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Neon orange 1.75 mm PLA filament on a 1 kg vacuum-sealed spool

Ziro 3D

Ziro 3D PLA Pro 1.75mm 1kg Filament Neon Orange 3d printers accessory

SKU CH-WKH3-M6AWW

High-precision 1.75 mm PLA filament on a 1 kg spool prints at 190–220 °C with ±0.03 mm tolerance for smooth, low-shrinkage results

  • ColorNeon Orange
  • TypeFilament

Color Neon Orange

  • Consistent layers from ±0.03 mm tolerance
  • Tangle-free spool enables uninterrupted printing
  • Vacuum-sealed pack keeps filament dry
  • 330 m length supports large projects
  • Biodegradable PLA prints at 190–220 °C without heated bed

Ziro 3D PLA Pro Filament Neon Orange

This Ziro 3D PLA Pro filament is a 1.75 mm polylactic acid spool weighing 1 kg and coloured Neon Orange. It suits hobbyists, educators and small workshops that want a low-odour, biodegradable material for everyday FDM printing. The 330 m roll arrives vacuum-sealed and tangle-free.

Makers who value consistent diameter

The +/- 0.03 mm tolerance and 190–220 °C print range help produce clean layers with minimal shrinkage. Users who need high-temperature resistance, engineering-grade strength or soluble support materials should look at other polymer families. The optional 50–60 °C bed temperature means a heated bed is not required.

Simple loading on most 1.75 mm FDM printers

The spool fits printers from Creality, Anycubic, Bambu and similar brands without modification. Keep the filament in its sealed bag with desiccant until use to avoid moisture uptake. Tangles only occur if the loose end is not secured to the spool holes during storage.

特長

  • Consistent layers from ±0.03 mm tolerance
  • Tangle-free spool enables uninterrupted printing
  • Vacuum-sealed pack keeps filament dry
  • 330 m length supports large projects
  • Biodegradable PLA prints at 190–220 °C without heated bed

仕様

ColorNeon Orange
TypeFilament

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 1.75mm spool work with my Creality Ender 3?

Yes — the filament is 1.75mm diameter, the standard size used by Creality, Anycubic, Bambu and most other FDM printers.

Can I print at 30mm/s on an older machine with this PLA Pro?

The suggested print speed range is 30-90mm/s, so 30mm/s is well within the recommended window for reliable extrusion.

How do I know the 1.75mm tolerance is holding during a print?

The manufacturing tolerance is ±0.03mm; consistent line width from layer to layer and strong inter-layer adhesion indicate the filament is performing within spec.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。