暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Blue PLA Pro filament spool, 1.75mm, 1kg, vacuum sealed

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm Blue 1kg

SKU CH-NJ2M-7RAXZ

Blue PLA Pro filament on a 1 kg spool, 1.75 mm diameter with ±0.03 mm tolerance, vacuum-sealed and tangle-free for smooth, low-shrinkage prints on most FDM printers

  • ColorBlue
  • TypeFilament

Color Blue

  • Precise prints from ±0.03 mm tolerance
  • Tangle-free spool ensures uninterrupted printing sessions
  • Vacuum-sealed pack keeps filament dry until use
  • Low-odour PLA prints without a heated bed
  • 37 colours available for creative project variety

Ziro PLA Pro 1.75 mm Blue 1 kg

This blue PLA Pro filament from Ziro 3D comes on a 1 kg spool with a 1.75 mm diameter. It is made for hobbyists and makers who use FDM printers and want a biodegradable material that prints without a heated bed and produces no odour during use.

Dimensional tolerance ±0.03 mm

The manufacturing tolerance of ±0.03 mm is the single specification that decides whether this filament suits a project. Tight control keeps line width consistent from layer to layer, reducing the risk of clogs or weak layer bonding on prints that demand repeatable extrusion.

Vacuum-sealed, tangle-free spool

Each roll arrives vacuum sealed with desiccant so the filament stays dry, and the spool is wound to be 100 % tangle-free. The suggested print range is 190–220 °C at 30–90 mm/s with an optional bed temperature of 50–60 °C, so most printers need only a standard PLA profile to start printing.

特長

  • Precise prints from ±0.03 mm tolerance
  • Tangle-free spool ensures uninterrupted printing sessions
  • Vacuum-sealed pack keeps filament dry until use
  • Low-odour PLA prints without a heated bed
  • 37 colours available for creative project variety

仕様

ColorBlue
TypeFilament

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the ±0.03 mm tolerance mean for my prints?

The tight tolerance keeps filament diameter consistent, so each layer extrudes the same width and you get cleaner detail with less variation between layers.

Which printers can use this 1.75 mm filament?

It fits most FDM printers designed for 1.75 mm material, including Creality, Anycubic and Bambu Lab models.

What spool dimensions should I check before buying?

The spool measures 209 mm by 209 mm by 73 mm and weighs 1.3 kg gross, so verify your printer's holder can accommodate that size.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。