暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee F6025B12H 60×25mm 12V 0.16A 3-pin case fan

SKU CH-RE6P-6KMAF

Cools components with a 60×25mm ball-bearing fan running at up to 1600 RPM on a 12V 3-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V power keeps wiring simple
  • ball bearing runs below 1600 RPM for long life
  • 60 mm × 25 mm frame fits tight 6025 mounts
  • 3-pin connector gives direct voltage control
  • 16 A draw leaves headroom on 12 V rail

Compact 60 mm case fan

The Zyvpee F6025B12H is a 60 by 25 mm case fan designed for tight chassis spaces or targeted component cooling. It runs on 12 V power and draws 0.16 A, making it suitable for low-noise system builds or replacement cooling in small-form-factor PCs.

Ball-bearing build with 3-pin connector

A ball bearing supports the rotor for consistent rotation below 1600 RPM without LED lighting. The three-pin connector supplies power and a tachometer signal so the motherboard can monitor fan speed, while the black frame blends into most interior colour schemes.

Check clearance and header type before ordering

Verify that your case or heatsink has mounting holes spaced for a 60 mm square frame and 25 mm thickness. Ensure the motherboard or fan controller provides a three-pin header; a four-pin PWM header will run the fan at full speed without speed control.

特長

  • 12 V power keeps wiring simple
  • ball bearing runs below 1600 RPM for long life
  • 60 mm × 25 mm frame fits tight 6025 mounts
  • 3-pin connector gives direct voltage control
  • 16 A draw leaves headroom on 12 V rail

仕様

Brand3ccooler.com
SeriesF6025B12H
ModelF6025B12H
TypeCase Fan
Bearing TypeBall
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions60*25mm

この商品に関する質問

What does the 3-pin connector limit for speed control on the F6025B12H?

The 3-pin connector supports voltage-based fan speed control only; it does not carry a PWM signal for precise duty-cycle adjustment.

What clearance does the 60×25 mm frame need for mounting?

The fan requires a 60 mm square cut-out with 25 mm depth; verify screw-hole spacing matches standard 60 mm mounting points before installation.

How is the F6025B12H wired, and which lead is often mistaken?

Connect the red wire to 12 V, black to ground, and yellow to the tachometer header; the yellow wire is frequently left unplugged, losing RPM monitoring.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。