我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black 60 by 25 millimetre case fan with three-pin connector

Zyvpee

Zyvpee F6025B12H 60×25mm 12V 0.16A 3-pin case fan

SKU CH-RE6P-6KMAF

Cools components with a 60×25mm ball-bearing fan running at up to 1600 RPM on a 12V 3-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V power keeps wiring simple
  • ball bearing runs below 1600 RPM for long life
  • 60 mm × 25 mm frame fits tight 6025 mounts
  • 3-pin connector gives direct voltage control
  • 16 A draw leaves headroom on 12 V rail

Compact 60 mm case fan

The Zyvpee F6025B12H is a 60 by 25 mm case fan designed for tight chassis spaces or targeted component cooling. It runs on 12 V power and draws 0.16 A, making it suitable for low-noise system builds or replacement cooling in small-form-factor PCs.

Ball-bearing build with 3-pin connector

A ball bearing supports the rotor for consistent rotation below 1600 RPM without LED lighting. The three-pin connector supplies power and a tachometer signal so the motherboard can monitor fan speed, while the black frame blends into most interior colour schemes.

Check clearance and header type before ordering

Verify that your case or heatsink has mounting holes spaced for a 60 mm square frame and 25 mm thickness. Ensure the motherboard or fan controller provides a three-pin header; a four-pin PWM header will run the fan at full speed without speed control.

商品特色

  • 12 V power keeps wiring simple
  • ball bearing runs below 1600 RPM for long life
  • 60 mm × 25 mm frame fits tight 6025 mounts
  • 3-pin connector gives direct voltage control
  • 16 A draw leaves headroom on 12 V rail

商品規格

Brand3ccooler.com
SeriesF6025B12H
ModelF6025B12H
TypeCase Fan
Bearing TypeBall
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions60*25mm

商品問答

What does the 3-pin connector limit for speed control on the F6025B12H?

The 3-pin connector supports voltage-based fan speed control only; it does not carry a PWM signal for precise duty-cycle adjustment.

What clearance does the 60×25 mm frame need for mounting?

The fan requires a 60 mm square cut-out with 25 mm depth; verify screw-hole spacing matches standard 60 mm mounting points before installation.

How is the F6025B12H wired, and which lead is often mistaken?

Connect the red wire to 12 V, black to ground, and yellow to the tachometer header; the yellow wire is frequently left unplugged, losing RPM monitoring.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。