暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black 50 by 15 millimetre case fan with three wires

Zyvpee

Zyvpee KDE1205PHV3 50x15mm 12V 0.5W 3-pin case fan

SKU CH-WF91-PAQD8

A 50 mm by 15 mm maglev CPU cooler fan running at up to 1600 RPM on a 12 V three‑pin connector

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Maglev bearing reduces friction for quieter operation
  • 12 V, 0.5 W draw keeps power use low
  • Three-pin connector fits standard motherboard headers
  • Compact 50 × 15 mm frame suits tight CPU coolers
  • Under 1600 RPM limit balances airflow and noise

Compact 50 mm maglev fan

The Zyvpee KDE1205PHV3 is a 50 by 15 mm case fan that runs on 12 V and draws 0.5 W. A maglev bearing keeps friction low while the three-pin connector supplies power and a tachometer signal. It is built for tight spaces where a standard 120 mm unit will not fit.

For small-form-factor coolers

This fan suits builders replacing a slim cooler fan in a low-profile CPU tower or a compact industrial chassis. The 3-pin header works with most motherboards and fan controllers that accept a tach lead. Buyers who need PWM speed control or a four-pin header should look elsewhere, as will anyone requiring higher static pressure for dense radiators.

1600 RPM maximum speed

The listed speed ceiling of <1600 RPM determines the airflow ceiling for this 5015 frame. Match that figure to the thermal design power of your cooler to confirm the fan can move enough air. If the cooler demands a faster or larger impeller, this model will not meet the requirement.

特長

  • Maglev bearing reduces friction for quieter operation
  • 12 V, 0.5 W draw keeps power use low
  • Three-pin connector fits standard motherboard headers
  • Compact 50 × 15 mm frame suits tight CPU coolers
  • Under 1600 RPM limit balances airflow and noise

仕様

BrandZyvpee
SeriesKDE1205PHV3
ModelKDE1205PHV3
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions50*15MM

この商品に関する質問

What motherboard header do I need for the 3-pin connector on this KDE1205PHV3 fan?

The fan uses a standard 3-pin connector that fits any 3-pin or 4-pin system fan header on the motherboard.

Will the 50 mm by 15 mm frame fit the mounting holes on my existing CPU cooler?

The fan measures 50 mm square by 15 mm thick, matching the common 5015 mounting pattern used on many compact CPU coolers.

How can I confirm the fan is spinning at the rated speed after installation?

Check the RPM reading in BIOS or monitoring software; it should report below 1600 RPM when the fan is running at full voltage.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。