我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Small black 50 by 15 millimetre case fan with three wires

Zyvpee

Zyvpee KDE1205PHV3 50x15mm 12V 0.5W 3-pin case fan

SKU CH-WF91-PAQD8

A 50 mm by 15 mm maglev CPU cooler fan running at up to 1600 RPM on a 12 V three‑pin connector

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Maglev bearing reduces friction for quieter operation
  • 12 V, 0.5 W draw keeps power use low
  • Three-pin connector fits standard motherboard headers
  • Compact 50 × 15 mm frame suits tight CPU coolers
  • Under 1600 RPM limit balances airflow and noise

Compact 50 mm maglev fan

The Zyvpee KDE1205PHV3 is a 50 by 15 mm case fan that runs on 12 V and draws 0.5 W. A maglev bearing keeps friction low while the three-pin connector supplies power and a tachometer signal. It is built for tight spaces where a standard 120 mm unit will not fit.

For small-form-factor coolers

This fan suits builders replacing a slim cooler fan in a low-profile CPU tower or a compact industrial chassis. The 3-pin header works with most motherboards and fan controllers that accept a tach lead. Buyers who need PWM speed control or a four-pin header should look elsewhere, as will anyone requiring higher static pressure for dense radiators.

1600 RPM maximum speed

The listed speed ceiling of <1600 RPM determines the airflow ceiling for this 5015 frame. Match that figure to the thermal design power of your cooler to confirm the fan can move enough air. If the cooler demands a faster or larger impeller, this model will not meet the requirement.

商品特色

  • Maglev bearing reduces friction for quieter operation
  • 12 V, 0.5 W draw keeps power use low
  • Three-pin connector fits standard motherboard headers
  • Compact 50 × 15 mm frame suits tight CPU coolers
  • Under 1600 RPM limit balances airflow and noise

商品規格

BrandZyvpee
SeriesKDE1205PHV3
ModelKDE1205PHV3
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions50*15MM

商品問答

What motherboard header do I need for the 3-pin connector on this KDE1205PHV3 fan?

The fan uses a standard 3-pin connector that fits any 3-pin or 4-pin system fan header on the motherboard.

Will the 50 mm by 15 mm frame fit the mounting holes on my existing CPU cooler?

The fan measures 50 mm square by 15 mm thick, matching the common 5015 mounting pattern used on many compact CPU coolers.

How can I confirm the fan is spinning at the rated speed after installation?

Check the RPM reading in BIOS or monitoring software; it should report below 1600 RPM when the fan is running at full voltage.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。