Zyvpee
Zyvpee KDE1205PHV3 50x15mm 12V 0.5W 3-pin case fan
A 50 mm by 15 mm maglev CPU cooler fan running at up to 1600 RPM on a 12 V three‑pin connector
- TypeCPU Cooler Fan
- CompatibilityCPU Cooler
- Bearing TypeMaglev
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- Maglev bearing reduces friction for quieter operation
- 12 V, 0.5 W draw keeps power use low
- Three-pin connector fits standard motherboard headers
- Compact 50 × 15 mm frame suits tight CPU coolers
- Under 1600 RPM limit balances airflow and noise
Compact 50 mm maglev fan
The Zyvpee KDE1205PHV3 is a 50 by 15 mm case fan that runs on 12 V and draws 0.5 W. A maglev bearing keeps friction low while the three-pin connector supplies power and a tachometer signal. It is built for tight spaces where a standard 120 mm unit will not fit.
For small-form-factor coolers
This fan suits builders replacing a slim cooler fan in a low-profile CPU tower or a compact industrial chassis. The 3-pin header works with most motherboards and fan controllers that accept a tach lead. Buyers who need PWM speed control or a four-pin header should look elsewhere, as will anyone requiring higher static pressure for dense radiators.
1600 RPM maximum speed
The listed speed ceiling of <1600 RPM determines the airflow ceiling for this 5015 frame. Match that figure to the thermal design power of your cooler to confirm the fan can move enough air. If the cooler demands a faster or larger impeller, this model will not meet the requirement.
Najważniejsze cechy
- Maglev bearing reduces friction for quieter operation
- 12 V, 0.5 W draw keeps power use low
- Three-pin connector fits standard motherboard headers
- Compact 50 × 15 mm frame suits tight CPU coolers
- Under 1600 RPM limit balances airflow and noise
Specyfikacja
| Brand | Zyvpee |
|---|---|
| Series | KDE1205PHV3 |
| Model | KDE1205PHV3 |
| Type | CPU Cooler Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Maglev |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Dimensions | 50*15MM |
Pytania dotyczące tego produktu
What motherboard header do I need for the 3-pin connector on this KDE1205PHV3 fan?
The fan uses a standard 3-pin connector that fits any 3-pin or 4-pin system fan header on the motherboard.
Will the 50 mm by 15 mm frame fit the mounting holes on my existing CPU cooler?
The fan measures 50 mm square by 15 mm thick, matching the common 5015 mounting pattern used on many compact CPU coolers.
How can I confirm the fan is spinning at the rated speed after installation?
Check the RPM reading in BIOS or monitoring software; it should report below 1600 RPM when the fan is running at full voltage.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001048BTC
Dostępny