暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60 by 25 mm square maglev case fan with two wires

Zyvpee

Zyvpee KDE2406PTVX 60mm 24V 1.9W 2-Pin Maglev Case Fan

SKU CH-Y2TP-30GRN

A 60 mm Maglev case fan running at 1600 RPM with 24 V power and 1.9 W draw

  • TypeCPU Cooler Fan
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 24 V 1.9 W power draw suits low-voltage systems
  • 60 × 25 mm frame fits tight chassis spaces
  • Sub-1600 RPM speed balances airflow and noise
  • 2-pin connector enables simple voltage control

Zyvpee KDE2406PTVX 60mm Maglev Fan

The Zyvpee KDE2406PTVX is a 60mm square cooling fan built with a maglev bearing for reduced friction and noise. It operates on a 24V DC supply drawing 1.9W and connects via a standard 2-pin power connector. This unit suits builders maintaining or assembling equipment that requires a 60x25mm form factor with inverter-grade cooling performance.

Replaces 6025 24V Fans in Tight Spaces

The fan serves as a direct drop-in for existing 6025-size 24V units used in industrial inverters or compact CPU coolers. Its maglev bearing offers a longer service life than sleeve or ball-bearing alternatives in the same mounting footprint. The upgrade is worthwhile when the original fan develops bearing rattle or fails to sustain airflow at the required 1600 RPM ceiling.

Sustained Operation Below 1600 RPM

Under continuous load the maglev design maintains stable rotation without the speed decay common in oil-dependent bearings. The 1.9W power draw remains constant, so thermal output inside the chassis stays predictable during extended duty cycles. Non-LED black housing avoids light bleed in photosensitive environments while the 2-pin interface reports no speed signal to the host controller.

特長

  • Maglev bearing reduces friction for quieter operation
  • 24 V 1.9 W power draw suits low-voltage systems
  • 60 × 25 mm frame fits tight chassis spaces
  • Sub-1600 RPM speed balances airflow and noise
  • 2-pin connector enables simple voltage control

仕様

BrandZyvpee
SeriesKDE2406PTVX
ModelKDE2406PTVX
TypeCPU Cooler Fan
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
Features6CM Inverter Cooling
Dimensions60*25MM

この商品に関する質問

Will this 60 mm by 25 mm fan fit my case's standard 60 mm mount?

The frame measures 60 by 25 mm, matching the common 6025 mounting pattern used on many cases and CPU coolers.

How do I connect the two-pin power lead without damaging the Maglev bearing?

Align the two wires with the 24 V header, press straight in — forcing it sideways can bend the pins and stress the Maglev rotor.

When should I expect to replace the Maglev bearing in this 24 V 1.9 W fan?

Maglev bearings have no physical contact, so they typically outlast sleeve or ball bearings; plan replacement only if RPM drops well below 1600 or noise appears.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。