Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Black 60 by 25 mm square maglev case fan with two wires

Zyvpee

Zyvpee KDE2406PTVX 60mm 24V 1.9W 2-Pin Maglev Case Fan

SKU CH-Y2TP-30GRN

A 60 mm Maglev case fan running at 1600 RPM with 24 V power and 1.9 W draw

  • TypeCPU Cooler Fan
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 24 V 1.9 W power draw suits low-voltage systems
  • 60 × 25 mm frame fits tight chassis spaces
  • Sub-1600 RPM speed balances airflow and noise
  • 2-pin connector enables simple voltage control

Zyvpee KDE2406PTVX 60mm Maglev Fan

The Zyvpee KDE2406PTVX is a 60mm square cooling fan built with a maglev bearing for reduced friction and noise. It operates on a 24V DC supply drawing 1.9W and connects via a standard 2-pin power connector. This unit suits builders maintaining or assembling equipment that requires a 60x25mm form factor with inverter-grade cooling performance.

Replaces 6025 24V Fans in Tight Spaces

The fan serves as a direct drop-in for existing 6025-size 24V units used in industrial inverters or compact CPU coolers. Its maglev bearing offers a longer service life than sleeve or ball-bearing alternatives in the same mounting footprint. The upgrade is worthwhile when the original fan develops bearing rattle or fails to sustain airflow at the required 1600 RPM ceiling.

Sustained Operation Below 1600 RPM

Under continuous load the maglev design maintains stable rotation without the speed decay common in oil-dependent bearings. The 1.9W power draw remains constant, so thermal output inside the chassis stays predictable during extended duty cycles. Non-LED black housing avoids light bleed in photosensitive environments while the 2-pin interface reports no speed signal to the host controller.

Puntos fuertes

  • Maglev bearing reduces friction for quieter operation
  • 24 V 1.9 W power draw suits low-voltage systems
  • 60 × 25 mm frame fits tight chassis spaces
  • Sub-1600 RPM speed balances airflow and noise
  • 2-pin connector enables simple voltage control

Especificaciones

BrandZyvpee
SeriesKDE2406PTVX
ModelKDE2406PTVX
TypeCPU Cooler Fan
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
Features6CM Inverter Cooling
Dimensions60*25MM

Preguntas sobre este artículo

Will this 60 mm by 25 mm fan fit my case's standard 60 mm mount?

The frame measures 60 by 25 mm, matching the common 6025 mounting pattern used on many cases and CPU coolers.

How do I connect the two-pin power lead without damaging the Maglev bearing?

Align the two wires with the 24 V header, press straight in — forcing it sideways can bend the pins and stress the Maglev rotor.

When should I expect to replace the Maglev bearing in this 24 V 1.9 W fan?

Maglev bearings have no physical contact, so they typically outlast sleeve or ball bearings; plan replacement only if RPM drops well below 1600 or noise appears.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.