저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black 60 by 25 mm square maglev case fan with two wires

Zyvpee

Zyvpee KDE2406PTVX 60mm 24V 1.9W 2-Pin Maglev Case Fan

SKU CH-Y2TP-30GRN

A 60 mm Maglev case fan running at 1600 RPM with 24 V power and 1.9 W draw

  • TypeCPU Cooler Fan
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 24 V 1.9 W power draw suits low-voltage systems
  • 60 × 25 mm frame fits tight chassis spaces
  • Sub-1600 RPM speed balances airflow and noise
  • 2-pin connector enables simple voltage control

Zyvpee KDE2406PTVX 60mm Maglev Fan

The Zyvpee KDE2406PTVX is a 60mm square cooling fan built with a maglev bearing for reduced friction and noise. It operates on a 24V DC supply drawing 1.9W and connects via a standard 2-pin power connector. This unit suits builders maintaining or assembling equipment that requires a 60x25mm form factor with inverter-grade cooling performance.

Replaces 6025 24V Fans in Tight Spaces

The fan serves as a direct drop-in for existing 6025-size 24V units used in industrial inverters or compact CPU coolers. Its maglev bearing offers a longer service life than sleeve or ball-bearing alternatives in the same mounting footprint. The upgrade is worthwhile when the original fan develops bearing rattle or fails to sustain airflow at the required 1600 RPM ceiling.

Sustained Operation Below 1600 RPM

Under continuous load the maglev design maintains stable rotation without the speed decay common in oil-dependent bearings. The 1.9W power draw remains constant, so thermal output inside the chassis stays predictable during extended duty cycles. Non-LED black housing avoids light bleed in photosensitive environments while the 2-pin interface reports no speed signal to the host controller.

주요 특징

  • Maglev bearing reduces friction for quieter operation
  • 24 V 1.9 W power draw suits low-voltage systems
  • 60 × 25 mm frame fits tight chassis spaces
  • Sub-1600 RPM speed balances airflow and noise
  • 2-pin connector enables simple voltage control

사양

BrandZyvpee
SeriesKDE2406PTVX
ModelKDE2406PTVX
TypeCPU Cooler Fan
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
Features6CM Inverter Cooling
Dimensions60*25MM

이 상품에 대한 질문

Will this 60 mm by 25 mm fan fit my case's standard 60 mm mount?

The frame measures 60 by 25 mm, matching the common 6025 mounting pattern used on many cases and CPU coolers.

How do I connect the two-pin power lead without damaging the Maglev bearing?

Align the two wires with the 24 V header, press straight in — forcing it sideways can bend the pins and stress the Maglev rotor.

When should I expect to replace the Maglev bearing in this 24 V 1.9 W fan?

Maglev bearings have no physical contact, so they typically outlast sleeve or ball bearings; plan replacement only if RPM drops well below 1600 or noise appears.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.