저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

A-Tech

A-Tech 16GB (2x8GB) DDR3 1333 ECC RDIMM 2Rx4 1.5V server RAM

SKU CH-SV1Q-33S6K

16 GB dual-channel DDR3 1333 ECC registered server memory kit with 240-pin DIMMs at 1.5 V

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 16 GB dual-channel kit expands server memory capacity
  • DDR3 1333 MHz rated speed supports compatible platforms
  • ECC registered design detects and corrects data errors
  • 2Rx4 dual-rank organisation increases memory density
  • 5 V standard voltage matches DDR3 server specifications

DDR3 ECC RDIMM kit for servers

This 16GB dual-channel kit contains two 8GB registered DIMMs built for DDR3 servers and workstations that require ECC error correction. Each module runs at 1333 MHz with CL9 latency at the standard 1.5V voltage. The 2Rx4 dual-rank x4 organisation suits platforms designed for registered memory.

Installation notes and common issues

The 240-pin DIMMs install like standard server memory, but the system must explicitly support DDR3 registered ECC modules; desktop and laptop boards will not accept them. Confirm the motherboard manual for correct channel population order before seating the modules. Mismatched rank or voltage settings in the BIOS are the usual cause of a no-post condition.

Registered ECC requirement decides fit

The single specification that determines compatibility is the registered ECC RDIMM design; only systems qualified for DDR3 registered ECC memory can use this kit. Verify the platform’s supported memory list before purchase.

주요 특징

  • 16 GB dual-channel kit expands server memory capacity
  • DDR3 1333 MHz rated speed supports compatible platforms
  • ECC registered design detects and corrects data errors
  • 2Rx4 dual-rank organisation increases memory density
  • 5 V standard voltage matches DDR3 server specifications

사양

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-10600R
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I confirm the ECC RDIMM kit is running at 1333 MHz with CL9 after installation?

Enter the server BIOS or use a hardware-monitoring tool such as CPU-Z to verify the memory speed shows 1333 MHz and the timings read CL9 for each 8 GB module.

What comes in the box and what must I source separately?

The box contains two 8 GB DDR3 240-pin registered DIMMs; no cables, brackets or additional components are included and none are required for installation.

Should I choose the 2Rx4 dual-rank kit or a single-rank alternative for my DDR3 server?

Select this 2Rx4 dual-rank kit when your server's memory controller supports dual-rank registered DIMMs and you need 16 GB in a two-module configuration.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.