저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

A-Tech

A-Tech 32GB 4x8GB DDR3 1066 ECC RDIMM 4Rx8 Server RAM

SKU CH-TAPF-WRGPV

A 32 GB DDR3 1066 MHz ECC registered quad-channel kit with four 8 GB modules, 4Rx8 organisation, 1.5 V operation and 240-pin DIMM form factor for server and workstation upgrades

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (4 x 8GB)

Speed DDR3 1066 (PC3 8500)

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1066 MHz speed handles demanding workloads efficiently
  • ECC registered design detects and corrects data errors
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • 240-pin DIMM form factor fits compatible server and workstation slots

Server memory kit for DDR3 platforms

This 32 GB kit contains four 8 GB DDR3 1066 MHz registered ECC DIMMs built for servers and workstations that require quad-rank modules. Each stick runs at the standard 1.5 V DDR3 voltage and uses a 240-pin form factor. The kit is not compatible with desktop or laptop computers.

Thermals and power in normal use

Registered DDR3 modules operating at 1.5 V draw modest power and produce low heat under typical server workloads. The quad-rank organisation does not increase voltage, so thermal output remains comparable to standard registered DIMMs. No active cooling is required beyond normal chassis airflow.

Quad-rank registered ECC constraint

The 4Rx8 organisation means each module presents four logical ranks to the memory controller. Only systems whose BIOS and chipset explicitly support quad-rank registered ECC DIMMs can use this kit. Verify the platform documentation before purchase.

주요 특징

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1066 MHz speed handles demanding workloads efficiently
  • ECC registered design detects and corrects data errors
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • 240-pin DIMM form factor fits compatible server and workstation slots

사양

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 4Rx8 PC3-8500R
Capacity32GB (4 x 8GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I install the 4Rx8 DDR3 1066 registered DIMMs into the 240-pin slots?

Power down the server, open the chassis, align each module's notch with the 240-pin DDR3 slot key, press firmly until the retention clips snap shut, then populate all four channels per the system manual for quad-channel operation.

Will the 1.5V DDR3 ECC RDIMMs need replacement after a certain period?

The modules are built with major-brand chips and tested for lifetime reliability; no scheduled replacement is required unless a module fails, in which case the lifetime warranty covers it.

At what point does the CL7 latency limit sustained throughput on heavy workloads?

CL7 timing at 1066 MHz sets the baseline access latency; under continuous heavy loads the memory controller's bandwidth ceiling is reached before latency becomes the primary bottleneck.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.