SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501651BTC
재고 있음
A-Tech
A-Tech 4GB DDR3L 1600 ECC SODIMM 204-Pin 1.35V
4GB DDR3L 1600 ECC SODIMM adds error-correcting memory to compatible laptops and microservers at 1.35V
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
- ECC protection prevents data errors with built-in error correction
- Low 1.35V DDR3L voltage reduces power draw and heat
- 1600MHz speed delivers responsive multitasking for microserver workloads
- 204-pin SO-DIMM form factor fits compatible laptop and microserver slots
- Tested replacement for Micron MT18KSF51272HZ-1G6K2 ensures reliable compatibility
What this module is
This is a 4GB DDR3L SODIMM rated at 1600MHz with ECC and a 1.35V operating voltage. It uses the 204-pin form factor and runs at CL11 latency. The module is an unbuffered replacement for Micron MT18KSF51272HZ-1G6K2 and is aimed at microserver, server or workstation laptops that require error-correcting memory.
Compatibility checks
Verify that your system accepts DDR3L SODIMMs at 1.35V and supports ECC unbuffered modules. Confirm the motherboard or laptop manual lists 1600MHz PC3-12800 as a supported speed and that the slot is a 204-pin SO-DIMM socket. Some platforms only accept non-ECC or 1.5V DDR3, so matching voltage and ECC type is essential before ordering.
Who this suits
This module suits owners of compatible microserver or workstation laptops needing a single 4GB ECC stick for maintenance or a modest capacity increase. It is not for systems that require registered or buffered memory, nor for platforms limited to 1.5V DDR3 without low-voltage support. Buyers needing higher densities or non-ECC memory should look elsewhere.
주요 특징
- ECC protection prevents data errors with built-in error correction
- Low 1.35V DDR3L voltage reduces power draw and heat
- 1600MHz speed delivers responsive multitasking for microserver workloads
- 204-pin SO-DIMM form factor fits compatible laptop and microserver slots
- Tested replacement for Micron MT18KSF51272HZ-1G6K2 ensures reliable compatibility
사양
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MT18KSF51272HZ-1G6K2 |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | MT18KSF51272HZ-1G6K2 |
| Recommend Use | Compatible Replacement for Micron MT18KSF51272HZ-1G6K2 |
이 상품에 대한 질문
Does the 4 GB DDR3L 1600 ECC SODIMM arrive as a single stick or do I need to buy anything else to install it?
The package contains one 4 GB 204-pin DDR3L 1600 CL11 1.35 V ECC unbuffered module; no extra parts or cables are required for installation.
Should I choose the 4 GB CL11 1.35 V version or look for a different capacity or speed for my microserver?
This module is a direct replacement for Micron MT18KSF51272HZ-1G6K2, so select it when your system calls for a single 4 GB DDR3L 1600 ECC SODIMM at 1.35 V.
What does the 1600 MHz PC3-12800 rating actually deliver once the stick is seated in a server board?
The module runs at DDR3L 1600 with CL11 timing at 1.35 V, providing ECC error correction and 12 800 MB/s peak bandwidth in compatible microserver or workstation slots.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
