SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502139BTC
재고 있음
A-Tech
A-Tech 64GB DDR5 4800 ECC RDIMM 2Rx4 EC8 Micron Replacement Server RAM
64 GB DDR5 4800 ECC registered DIMM with 2Rx4 Micron chips, CL40 at 1.1 V
- Capacity64GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS Latency40
- Voltage1.10V
- ECCYes
- 64GB capacity handles demanding server workloads
- DDR5 4800MHz speed delivers high bandwidth performance
- ECC registered design ensures data integrity protection
- 2Rx4 dual-rank architecture maximises memory density
- 10V standard voltage maintains efficient power consumption
What this product is
The A-Tech 64GB DDR5 4800 ECC RDIMM is a registered server memory module built with Micron chipset components. It operates at 4800 MT/s with a CAS latency of 40 and runs at the standard 1.10 V. The module uses a 288-pin form factor and a 2Rx4 organisation for high-density capacity in a single stick.
Who this suits and who it does not
This module suits administrators upgrading Micron-based servers that require registered ECC DDR5 memory in a 64 GB density. It is not for desktop PCs or laptops that accept only unbuffered non-ECC DIMMs. Buyers who need a heat spreader or a lower latency rating should look at a different product.
What to check before ordering
Confirm that your system supports DDR5 registered ECC RDIMMs and that the memory controller can address a 64 GB 2Rx4 module at 4800 MT/s. Verify the motherboard has free 288-pin DDR5 slots and consult the vendor’s qualified-vendor list for this exact Micron part number. Ensure the platform accepts 1.10 V operation without additional voltage configuration.
주요 특징
- 64GB capacity handles demanding server workloads
- DDR5 4800MHz speed delivers high bandwidth performance
- ECC registered design ensures data integrity protection
- 2Rx4 dual-rank architecture maximises memory density
- 10V standard voltage maintains efficient power consumption
사양
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron MTC40F204651RC48BAS MTC40F2046S1RC48BAX |
| Model | A-Tech 64GB DDR5-4800 ECC RDIMM Server RAM Module |
| Capacity | 64GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Micron Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
이 상품에 대한 질문
Does my server need DDR5 RDIMM slots that accept 288-pin modules running at 1.1 V?
Yes, this is a 288-pin DDR5 RDIMM that operates at 1.1 V, so the motherboard must provide DDR5 registered DIMM slots with that voltage.
Can I install this 64 GB 2Rx4 ECC RDIMM alongside existing DDR5 4800 ECC RDIMMs of different capacity?
Mixing is possible if the platform supports mixed-capacity DDR5 ECC RDIMMs at 4800 MT/s, but the memory controller will run all modules at the lowest common speed and timing.
How can I confirm the module is detected at 4800 MT/s with ECC active after installation?
Check the BIOS memory information or the OS memory report — both should show 64 GB at 4800 MT/s with ECC enabled and the correct 2Rx4 rank configuration.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
