Athena Power
Athena Power AP-RRP4ATX6508 2 x 500W redundant server power supply
- EPS12V
- Redundant
US$393.99
0.00500337BTC
재고 있음
Athena Power
Athena Power AP-RRP4ATX6808 800W redundant server power supply
An 800W redundant server power supply with 20+4Pin main connector and 80 PLUS Bronze efficiency
- Single/RedundantRedundant
- Maximum Power800W
- Main Connector20+4Pin
- Output Current+5V@24A, +12V x [email protected] , +3.3V@24A, -5V@0A, [emai
- Input Voltage88 -264 Volts Ac
- Input Frequency Range47 - 63 Hz
Maximum Power 800W
- 500W
- 800W
- 800W redundant design keeps servers running during a module failure
- 80 PLUS Bronze efficiency reduces energy waste and heat output
- 88–264 V AC input works worldwide without a voltage switch
- 100,000-hour MTBF at 25 °C indicates long-term reliability
- Compact 5.9″ × 3.4″ × 8.9″ form factor fits dense rack chassis
800W redundant server supply
The Athena Power AP-RRP4ATX6808 is an 800 watt redundant power supply built for rack servers that require continuous uptime. It fits standard 20+4 pin ATX motherboards and accepts 88 to 264 volt AC input at 47 to 63 Hz. The unit carries 80 PLUS Bronze certification and is rated for 100,000 hours MTBF at full load and 25 °C.
Redundant 800W headroom
Two hot-swap modules share the load so a single module failure does not interrupt operation. The +12 volt rail delivers up to 30 amps while +5 volt and +3.3 volt rails each provide 24 amps. Maximum combined output is 800 watts; sustained loads above that will trip protection. Hold-up time is at least 20 ms at nominal input.
Compact redundant build
The supply measures 5.9 by 3.4 by 8.9 inches and weighs 9.0 lbs, matching common redundant PSU bays. Dielectric withstand is tested at 1800 volts AC primary to frame ground. Operating temperature range is 5 °C to 40 °C at 250 watt load or -10 °C to 50 °C at 220 watt load. Not suited for builds needing higher single-rail current or non-redundant form factors.
주요 특징
- 800W redundant design keeps servers running during a module failure
- 80 PLUS Bronze efficiency reduces energy waste and heat output
- 88–264 V AC input works worldwide without a voltage switch
- 100,000-hour MTBF at 25 °C indicates long-term reliability
- Compact 5.9″ × 3.4″ × 8.9″ form factor fits dense rack chassis
사양
| Brand | Athena Power |
|---|---|
| Model | AP-RRP4ATX6808 |
| Single/Redundant | Redundant |
| Maximum Power | 800W |
| Main Connector | 20+4Pin |
| Output Current | +5V@24A, +12V x [email protected] , +3.3V@24A, -5V@0A, [email protected] , +5V-SB@4A |
| Input Voltage | 88 -264 Volts Ac |
| Input Frequency Range | 47 - 63 Hz |
| MTBF | 100,000 Hours on Maximum Load at +25°C |
| Hold-up Time | 20ms Minimum at Nominal Input Voltage |
| Features | Dielectric Withstand: Primary Frame Ground 1800V AC for 1 Second Rise time: 50ms maximum |
| Dimensions | 5.9" x 3.4" x 8.9" |
| Weight | 9.0 lbs. |
| Humidity | 90% on Operating, 95% on Storage |
| Temperature | Operating +5° C ~ +40° C on 250W Output Load or -10° C ~ +50° C on 220W Output Load |
| 배송 무게 | 5.25 kg |
| 포장 크기 | 290 × 254 × 193 mm |
이 모델의 다른 버전
같은 라인업에서 1개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
이 상품에 대한 질문
Will the 20+4Pin main connector and 800W output work with my older ATX motherboard that uses a 20-pin socket?
The 20+4Pin connector splits so the 20-pin section fits legacy ATX boards while the 800W capacity provides ample headroom for older components.
How can I verify the redundant modules are both active after installation?
Each module has its own AC inlet and status LED; both LEDs lit green confirm both units are sharing the load.
Does the package include the IEC power cords for each module or must I buy them separately?
The unit ships with the redundant power-supply modules installed in the chassis; IEC cords for the dual inlets are not included and must be sourced separately.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00497797BTC
재고 있음
