AZZA
AZZA HURRICANE III DIGITAL ARGB 120mm 4-pack case fan
Four 120 mm fans with hydro bearings deliver 49.1 CFM at up to 1800 RPM while staying at 26.29 dB(A), and addressable ARGB lighting runs through the full acrylic frame
- Fan Counts4 Fans
- Fan ControllerController
- TypeCase Fan
- Fan Thickness25mm
- Bearing TypeHydro Bearing
- RPM1000-1800±10% RPM
- Four fans deliver 49.1 CFM airflow each
- Hydro bearing runs at 26.29 dB(A) for quiet operation
- PWM control spans 1000 to 1800 RPM for flexible speed
- Dual-ring addressable RGB lights entire frame evenly
- Included hub connects seven ARGB and six PWM devices
Four-Fan ARGB Kit with Controller
The AZZA Hurricane III Digital ARGB set includes four 120 mm case fans and a dedicated hub. Each fan uses a hydro bearing and runs between 1000 and 1800 RPM. The acrylic frame carries addressable LEDs on a dual-ring layout. A 4-pin PWM connector powers the motor while a 5 V 3-pin header drives the lighting.
Builders Who Want Synchronised Lighting
This kit suits builders who want co-ordinated ARGB illumination across multiple intake or exhaust positions without buying separate controllers. The included hub provides seven 3-pin ARGB ports and six 4-pin PWM ports. Systems that lack a 5 V addressable RGB header on the motherboard cannot control the lighting effects.
49.1 CFM Airflow at 26.29 dB(A)
Maximum airflow reaches 49.1 CFM with a static pressure of 1.91 mmH2O. Noise stays at 26.29 dB(A) at full speed. These figures determine whether the fans can move enough air through restrictive radiators or dense mesh panels for a given thermal target.
주요 특징
- Four fans deliver 49.1 CFM airflow each
- Hydro bearing runs at 26.29 dB(A) for quiet operation
- PWM control spans 1000 to 1800 RPM for flexible speed
- Dual-ring addressable RGB lights entire frame evenly
- Included hub connects seven ARGB and six PWM devices
사양
| Brand | AZZA |
|---|---|
| Series | HURRICANE III |
| Part Number | FNAZ-12DRGB3-011 |
| Fan Counts | 4 Fans |
| Fan Controller | Controller |
| Type | Case Fan |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 1000-1800±10% RPM |
| Air Flow | 49.1CFM |
| Noise Level | 26.29 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | ARGB |
| Dimensions | 120x120x25 mm |
이 상품에 대한 질문
Should I buy the four-fan kit or look for a different pack size?
This model is sold only as a four-fan kit with the controller hub included, so you get matching fans and the hub in one box.
What does the 49.1 CFM airflow figure mean for my build?
At maximum speed the fans move 49.1 CFM with 1.91 mmH₂O static pressure, enough for typical case intake or exhaust while staying at 26.29 dB(A).
Will the 5 V 3-pin ARGB connector work with my motherboard's 5 V addressable header?
Yes, the hub includes a 5 V 3-pin WS2812B addressable RGB connector that plugs directly into a standard motherboard 5 V ARGB header.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001051BTC
재고 있음