Dynatron
Dynatron K17 92 mm CPU cooler 4 heat pipes 105 W TDP
A 92 mm tower cooler with four heat pipes and dual-ball bearing fan handles up to 105 W TDP for Intel LGA 1150, 1151, 1155 and 1156 sockets
- TypeFan & Heatsinks
- Fan Size92mm
- CPU Socket CompatibilityIntel LGA 1156 / 1155 / 1151
- Bearing Type2 Ball
- RPM1000 RPM (20%) 1800 RPM (50%) 2500 RPM (100%)
- Air Flow17.34 CFM (20%) 31.21 CFM (50%) 43.36 CFM (100%)
- Cools up to 105 W TDP with four heat pipes
- 92 mm fan runs at 1000 RPM minimum for quiet operation
- Double-ball bearing ensures long fan life
- PWM control adjusts speed automatically from 20 % to 100 %
- Compact 110 mm height fits tight chassis
92 mm fan and four heat pipes
The Dynatron K17 is a 92 mm tower-style air cooler that uses four U-shape heat pipes with H.C.C. technology to move heat from the CPU into an aluminium fin stack. A double-ball bearing fan spins between 1000 and 2500 RPM depending on PWM duty cycle. The unit stands 110 mm tall and weighs 530 g.
Suitable for LGA 1150/1155/1156 CPUs up to 105 W TDP
This cooler fits Intel sockets LGA 1150, 1155 and 1156 and is rated for processors drawing up to 105 watts, covering the listed Core i3, i5, i7, Pentium and Xeon E3 models. Builders using newer socket types, higher TDP chips, or cases with less than 110 mm of cooler clearance should look at other solutions.
105 W TDP rating
The single specification that decides fitment is the 105 W thermal design power limit; if the target CPU exceeds this figure the cooler cannot guarantee adequate thermal performance.
주요 특징
- Cools up to 105 W TDP with four heat pipes
- 92 mm fan runs at 1000 RPM minimum for quiet operation
- Double-ball bearing ensures long fan life
- PWM control adjusts speed automatically from 20 % to 100 %
- Compact 110 mm height fits tight chassis
사양
| Brand | Dynatron |
|---|---|
| Model | K17 |
| Type | Fan & Heatsinks |
| Fan Size | 92mm |
| CPU Socket Compatibility | Intel LGA 1156 / 1155 / 1151 |
| Bearing Type | 2 Ball |
| RPM | 1000 RPM (20%) 1800 RPM (50%) 2500 RPM (100%) |
| Air Flow | 17.34 CFM (20%) 31.21 CFM (50%) 43.36 CFM (100%) |
| Noise Level | 17.0 dBA (20%) 24.78 dBA (50%) 31.92 dBA (100%) |
| Power Connector | 4 Pin |
| Heatsink Material | Aluminum |
| Fan Mounting Types to Heatsink | Horizontal |
| Max CPU Cooler Height | 110 mm |
| Fan Dimensions | 92 x 25.0 mm |
| Weight | 530 g |
| Features | Intelligent H.C.C Low Noise High-density wave-fin U-Shape Heatpipe x4 Energy-Savirtg PWM RoHS |
| 배송 무게 | 0.66 kg |
| 포장 크기 | 142 × 137 × 132 mm |
이 상품에 대한 질문
Does the Dynatron K17 include mounting hardware for LGA 1151 sockets or must I buy a separate bracket?
The cooler is built for Intel LGA 1156, 1155 and 1151 sockets; the supplied mounting kit covers those platforms so no extra bracket is required.
The K17 lists three duty-cycle speeds — which one should I set in the BIOS for a 105 W CPU?
At 100 % duty the fan reaches 2500 RPM, 43.36 CFM airflow and 31.92 dBA, matching the 105 W TDP rating; lower duty cycles reduce cooling capacity.
What does the 105 W TDP figure mean once the cooler is installed in a case with limited airflow?
The 105 W rating is achieved at full fan speed (2500 RPM, 3.00 mm-H₂O static pressure); restricted case airflow will lower the practical heat dissipation below that figure.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001049BTC
재고 있음