저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Blue semi-flexible TPU filament spool, 2.85 mm diameter, 500 g weight

E3D Online

E3D Online FleXD Semi-flexible TPU Filament 2.85mm 500g Oxford Blue 3d printers accessory

SKU CH-R9BP-BGECS

Semi-flexible TPU filament in 2.85 mm diameter, 500 g spool, prints at 220-240 °C bed 45-85 °C with high abrasion resistance and rich Oxford Blue colour

  • ColorBlue
  • TypeFilament
  • Easy to print at 15 mm/s with 220–240 °C nozzle and 45–85 °C bed
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress
  • Elastic and flexible with rich, solid Oxford Blue color
  • Compatible with water-soluble Scaffold support for clean overhangs

E3D FleXD Semi-flexible TPU Filament 2.85mm

This Oxford Blue filament is a semi-flexible TPU designed for 3D printers that accept 2.85mm material. It suits makers who want elastic, abrasion-resistant parts with a rich, solid colour and high shear strength.

Print temperature range 220-240°C and bed 45-85°C

The material prints at 220-240°C with a heated bed between 45°C and 85°C. A slow feed rate of roughly 15mm/s — about 30% of typical speed — is required, and a glue stick on the bed helps adhesion.

Check your printer takes 2.85mm filament

Verify that the extruder and hotend support 2.85mm diameter filament and that the firmware can sustain a print speed around 15mm/s. Confirm the heated bed reaches at least 45°C and the hotend reaches 220°C before ordering.

주요 특징

  • Easy to print at 15 mm/s with 220–240 °C nozzle and 45–85 °C bed
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress
  • Elastic and flexible with rich, solid Oxford Blue color
  • Compatible with water-soluble Scaffold support for clean overhangs

사양

BrandE3D
ModelFleXD
ColorBlue
TypeFilament

이 상품에 대한 질문

Is the 2.85 mm diameter and 500 g spool the only option for this FleXD filament?

Yes, this listing is for the 2.85 mm diameter supplied on a 500 g spool in Oxford Blue.

What do the 220–240 °C nozzle and 45–85 °C bed temperatures mean for everyday printing?

They are the recommended operating window; start near the middle of each range and adjust for your specific printer.

How does the 30 % speed guideline of 15 mm/s affect print time and quality?

Printing at 15 mm/s slows output but greatly improves layer adhesion and dimensional accuracy with this flexible material.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.