暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Blue semi-flexible TPU filament spool, 2.85 mm diameter, 500 g weight

E3D Online

E3D Online FleXD Semi-flexible TPU Filament 2.85mm 500g Oxford Blue 3d printers accessory

SKU CH-R9BP-BGECS

Semi-flexible TPU filament in 2.85 mm diameter, 500 g spool, prints at 220-240 °C bed 45-85 °C with high abrasion resistance and rich Oxford Blue colour

  • ColorBlue
  • TypeFilament
  • Easy to print at 15 mm/s with 220–240 °C nozzle and 45–85 °C bed
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress
  • Elastic and flexible with rich, solid Oxford Blue color
  • Compatible with water-soluble Scaffold support for clean overhangs

E3D FleXD Semi-flexible TPU Filament 2.85mm

This Oxford Blue filament is a semi-flexible TPU designed for 3D printers that accept 2.85mm material. It suits makers who want elastic, abrasion-resistant parts with a rich, solid colour and high shear strength.

Print temperature range 220-240°C and bed 45-85°C

The material prints at 220-240°C with a heated bed between 45°C and 85°C. A slow feed rate of roughly 15mm/s — about 30% of typical speed — is required, and a glue stick on the bed helps adhesion.

Check your printer takes 2.85mm filament

Verify that the extruder and hotend support 2.85mm diameter filament and that the firmware can sustain a print speed around 15mm/s. Confirm the heated bed reaches at least 45°C and the hotend reaches 220°C before ordering.

特長

  • Easy to print at 15 mm/s with 220–240 °C nozzle and 45–85 °C bed
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress
  • Elastic and flexible with rich, solid Oxford Blue color
  • Compatible with water-soluble Scaffold support for clean overhangs

仕様

BrandE3D
ModelFleXD
ColorBlue
TypeFilament

この商品に関する質問

Is the 2.85 mm diameter and 500 g spool the only option for this FleXD filament?

Yes, this listing is for the 2.85 mm diameter supplied on a 500 g spool in Oxford Blue.

What do the 220–240 °C nozzle and 45–85 °C bed temperatures mean for everyday printing?

They are the recommended operating window; start near the middle of each range and adjust for your specific printer.

How does the 30 % speed guideline of 15 mm/s affect print time and quality?

Printing at 15 mm/s slows output but greatly improves layer adhesion and dimensional accuracy with this flexible material.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。