EN-Labs PCIEU32S20KIT USB 3.0 expansion card with 3.5" front panel
- Controller Card
- 2 Ext / 2 Int
EN-Labs
Adds four USB 3.0 ports — two external Type-A and two via a 20-pin internal header — through a PCIe x1 slot with SATA power for high-draw devices
Model 2x Type A – Ext
This EN-Labs expansion card adds four USB 3.0 ports to a desktop computer through an available PCI Express slot. It provides two external Type-A ports and two internal ports via a 20-pin header for front-panel connectivity. The card suits builders who need more USB 3.0 connections for peripherals or front-panel upgrades.
The card fits PCIe x1, x4, x8 and x16 slots and includes a full-profile bracket with a low-profile bracket supplied. A 15-pin SATA power connector is present on the board and must be connected for power-hungry devices; forgetting this cable is the most frequent reason ports appear dead. Driver installation from the included CD or a download is required before the ports become active.
The NEC UPD720201 controller delivers up to 5 Gbps per port and is backward compatible with USB 2.0 and USB 1.1 devices. The single PCIe 2.0 x1 host link caps total throughput at the same 5 Gbps, so simultaneous heavy traffic on all four ports will share that bandwidth. Buyers needing higher aggregate throughput or more than four ports should choose a different solution.
| Brand | En-Labs |
|---|---|
| Model | PCE4USB-RS1 |
| Type | PCI Express to USB Card |
| External USB Ports | 2 Ext / 2 Int |
| Specifications | Bus Type:PCI Express Type Standard:Profile (LP bracket incl.) Chipset:NEC UPD720201 Interface: USB 3.0 Port Type and Rate :USB 3.0 - 5 Gbit/s Connector Type(s): 1 - PCI Express x1 Male External Ports: 2 - USB Type-A (9 pin) USB 3.0 Female Internal Ports : 2 x US 3.0 Internal Ports (20 pin connector) front panel for floppy bay Internal Ports : 1 - SATA 15 pin interface |
| Features | Add 4 USB 3.0 ports(2 x Type A + 20 Pin Interna) through a PCI Express slot Compatible with PCI-Express 2.0 stardard Compatible with Super Speed USB 3.0 5Gbps stardard,backwards to USB 2.0 and USB 1.1 Compatible with XHCI specification 1.0 Chip set : NEC UPD720201 Maximum transfer speed : 5Gbps Power by PCIe slot,no extra power adapter is needed, but still built-in power-enhanced SATA 15pin male Interface Supports PCIe 1x, 4x, 8x, 16x Slot Support Windows XP / 2003 / Win7 / Win8 / Vista / Linux |
| Package Contents | 1 x PCIe USB 3.0 PCI express card 1 x Driver CD |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Check Device Manager under Universal Serial Bus controllers; the card should appear as a USB 3.0 host controller. Run a file transfer to a USB 3.0 flash drive and verify speeds approach 5 Gbps.
The package includes the PCIe card, a low-profile bracket, and a driver CD. You must provide a SATA 15-pin power cable from your PSU to the card's onboard connector.
Use the 20-pin internal header to add two USB 3.0 ports to your case front panel; the two external Type-A ports are fixed at the rear bracket for rear-access devices.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?