저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
A single rectangular power supply module, matte black metal casing, open grille on one side, gold 80 Plus badge

FSP

FSP Twins Pro 700W Redundant PSU Module

SKU CH-TW6K-4XBKK

Hot-swappable 700 W ATX PS2 redundant module with 80 Plus Gold efficiency for continuous server uptime

  • TypeATX12V / EPS12V
  • Maximum Power700 W
  • Max PSU Length190 mm
  • ModularNon-Modular
  • Energy-Efficient80 PLUS GOLD Certified

Options ATX PS2 Individual (700W)

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • Hot-swappable module keeps the system running during replacement
  • 80 PLUS Gold certified for greater than 90 % efficiency
  • 700 W maximum power in a 190 mm ATX PS2 form factor
  • Redundant 1+1 design shares load evenly between two modules
  • Meets UL 62368 and ATX 12V / EPS 12V standards

Replacement Module for Twins Pro 700W

This single module replaces a failed unit inside the FSP Twins Pro 700W redundant power supply. It is designed for system builders and IT staff who need to restore redundancy without swapping the entire chassis. The module fits the ATX PS2 form factor used by the Twins Pro platform. Hot-swap capability lets you exchange it while the system stays online.

80 Plus Gold Efficiency and Thermal Behaviour

The module meets 80 Plus Gold certification with efficiency greater than 90 percent at typical loads. Under normal operation the twin modules share the load evenly, which reduces the current handled by each unit and keeps internal temperatures lower. Hot-swap design means a faulty module can be removed without shutting down the server or workstation. Compliance with UL 62368 confirms the safety envelope for continuous operation.

Hot-Swap Restores Full Redundancy

Swapping in a fresh module instantly returns the power supply to 1+1 redundant mode so the remaining unit no longer carries the full load alone. No additional cables or configuration tools are required because the module uses the existing Twins Pro backplane connectors. The changeover is transparent to the operating system and attached hardware. This keeps servers, workstations and critical home systems running without interruption.

주요 특징

  • Hot-swappable module keeps the system running during replacement
  • 80 PLUS Gold certified for greater than 90 % efficiency
  • 700 W maximum power in a 190 mm ATX PS2 form factor
  • Redundant 1+1 design shares load evenly between two modules
  • Meets UL 62368 and ATX 12V / EPS 12V standards

사양

BrandFSP Group
TypeATX12V / EPS12V
Maximum Power700 W
Max PSU Length190 mm
ModularNon-Modular
Energy-Efficient80 PLUS GOLD Certified

이 모델의 다른 버전

같은 라인업에서 3개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I install the FSP Twins Pro module into the 1+1 chassis and what step is often missed?

Slide the module into the ATX PS2 bay until the latch clicks, then secure the retention screw; the step often missed is tightening that screw, which keeps the hot-swap connector fully seated.

What maintenance or replacement will this 700 W module need later?

The unit is a field-replaceable module; if a fan bearing wears or efficiency drops below 80 Plus Gold, swap the module without tools — no internal capacitors are user-serviceable.

What limit appears first when the module runs at full 700 W load continuously?

Thermal protection engages first; the redundant design shares load between two modules, so sustained 700 W on a single module triggers over-temperature shutdown before any electrical limit is reached.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.