BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
G.SKILL
Dual-channel 16 GB kit with two 8 GB DDR3 1600 CL10 modules at 1.50 V and a 3.2 cm low-profile heat spreader
The G.SKILL Ares F3-1600C10D-16GAO provides 16GB of DDR3 memory in a dual-channel kit of two 8GB modules. It runs at 1600MHz with CL10 10-10-10 timings at 1.50V. The 3.2cm heat spreader fits small-form-factor builds and clears large CPU coolers. Compatibility covers Intel LGA1155 and LGA1156 plus AMD AM3 and AM3+ platforms with XMP support.
Extensive stress testing validates stability during prolonged workloads rather than brief bursts. The low-profile spreader dissipates heat to maintain rated 1600MHz speeds over long sessions. Unbuffered non-ECC operation ensures consistent throughput for desktop applications. The kit retains overclocking headroom above the standard PC3-12800 specification.
DDR3 topology caps transfer rates at the rated 1600MHz PC3-12800 ceiling. Dual-channel architecture doubles bandwidth over single-module configurations. CL10 latency represents the practical floor for this voltage and density combination. Manual BIOS tuning or the XMP profile is required to reach the advertised speed on supported platforms.
| Brand | G.SKILL |
|---|---|
| Series | Ares Series |
| Model | F3-1600C10D-16GAO |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL10 |
| Timing | 10-10-10 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Orange |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors To reach rated memory speed, enabling Intel XMP profile or manual BIOS tuning is required Combination with other memory kits or modules (even with same model number) is not recommended to avoid any compatibility issues |
| 배송 무게 | 0.11 kg |
| 포장 크기 | 206 × 133 × 18 mm |
The modules measure 3.2 cm in height, which is low-profile by design. Measure the gap between your motherboard DIMM slots and the cooler base; if the clearance exceeds 3.2 cm the kit will fit without interference.
Enable the Intel XMP profile in the BIOS, or manually set the frequency to 1600 MHz, timings to 10-10-10 and voltage to 1.50 V. The kit is validated for XMP on 1st-3rd Gen Core platforms.
Yes. The specifications list compatibility with AMD AM3, AM3+ and Llano platforms, so the dual-channel kit will work on an AM3+ board running at the rated 1600 MHz CL10 settings.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?