저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Three black 120mm case fans with infinity mirror lighting and daisy-chain connectors shown together

Jungle Leopard

Jungle Leopard Interstellar V2 120mm Case Fan Black Triple Pack

SKU CH-C6ET-48YT8

Triple pack of 120 mm hydraulic-bearing fans with daisy-chain ARGB infinity-mirror lighting, controller included, 68 CFM at under 32 dB(A)

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color Black-Forward

  • Triple pack cools 360 mm radiators with 68 CFM each
  • Hydraulic bearing runs 900-1850 RPM under 32 dB(A)
  • Daisy-chain slide-in pins cut cable count to one per cluster
  • Infinity-mirror side lighting adds depth without extra wiring
  • Eight damping pads suppress resonance to 29 dBA

Triple 120 mm ARGB fan kit

This triple pack supplies three 120 mm case fans with integrated infinity-mirror lighting and a daisy-chain interlock system. Each unit runs on a 4-pin connector and is designed for standard case mounts or a 360 mm liquid-cooling radiator.

Hydraulic bearing and nylon-mesh cables

Hydraulic bearings keep the 900-1850 RPM range smooth while eight damping pads limit resonance to 29 dBA. The nylon-mesh sleeved cables resist snagging, and the slide-in pin-to-pin locking lets a whole cluster run from a single lead for a cleaner interior.

Upgrade from single-cable or non-ARGB fans

Builders replacing basic 120 mm fans gain addressable lighting, lower cable count and 68 CFM airflow at 2.4 mmH₂O pressure without exceeding 32 dBA. The jump is worthwhile when a case or 360 mm cooler needs three matched fans that install in seconds rather than minutes.

주요 특징

  • Triple pack cools 360 mm radiators with 68 CFM each
  • Hydraulic bearing runs 900-1850 RPM under 32 dB(A)
  • Daisy-chain slide-in pins cut cable count to one per cluster
  • Infinity-mirror side lighting adds depth without extra wiring
  • Eight damping pads suppress resonance to 29 dBA

사양

BrandJungle Leopard
SeriesInterstellar
ModelInterstellar V2
Part NumberInterstellar V2
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM900-1850RPM
Air Flow68CFM
Air Pressure2.4mmH20
Noise Level<32dB(A)
Power Connector4 Pin
ColorBlack
Dimensions120×120×25mm 4.72*4.72*0.98in

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What does the 4-pin PWM connector on the Jungle Leopard Interstellar V2 actually control?

The 4-pin connector enables pulse-width modulation so the motherboard or supplied controller can vary speed precisely between 900 and 1850 RPM while reporting real-time tachometer feedback.

Will the 25 mm thick fans with their 8 vibration pads fit a standard 120 mm mounting grid?

Yes. Each fan measures 120 × 120 × 25 mm, matching the industry 120 mm hole pattern, and the eight corner pads add only a fraction of a millimetre without interfering with screws.

How do I connect the three fans in the daisy-chain without creating a short?

Align the slide-in pin-to-pin interlock on each fan, press firmly until the latch clicks, then run the single combined lead to the controller or motherboard header — reversing the orientation bends pins and breaks the chain.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.