Kingston Technology Corp. KC3000 SKC3000S/512G 512GB internal SSD
- Internal Solid Stat…
- Consumer
Kingston Technology Corp.
M.2 2280 internal SSD with 4096 GB capacity, PCIe 4.0 x4 NVMe interface, 7000 MB/s sequential speeds, 1,000,000 IOPS random performance, Phison E18 controller, 4 GB DRAM cache.
The Kingston KC3000 SKC3000D/4096G is a 4096GB internal SSD built for consumer workloads that demand high throughput. It uses the M.2 2280 form factor and connects through a PCIe 4.0 x4 NVMe link driven by a Phison E18 controller with 4GB of DRAM cache. 3D TLC memory supports the rated endurance of 3.2PBW and an MTBF of 1,800,000 hours.
A low profile graphene aluminum heat spreader is fitted to the drive to manage temperatures during operation. The controller is specified to run between 0°C and +70°C. Power draw measures 5 mW at idle, 0.36W average active, 2.7W maximum read and 10.2W maximum write, keeping energy use low for a high performance NVMe device.
Under continuous heavy write workloads the heat spreader helps the controller maintain performance without rapid throttling. The drive is rated for 1,000,000 IOPS random read and write alongside 7000 MBps sequential read and write, figures that reflect steady state capability rather than short burst peaks. Vibration resistance is rated at 2.17G peak operating and 20G peak non operating.
| Brand | Kingston |
|---|---|
| Series | KC3000 |
| Model | SKC3000D/4096G |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4096GB |
| Memory Components | 3D TLC |
| Interface | PCIe 4.0 x4 NVMe |
| Protocol | NVMe |
| Controller | Phison E18 |
| Cache | 4GB DRAM |
| Max Sequential Read | Up to 7000 MBps |
| Max Sequential Write | Up to 7000 MBps |
| 4KB Random Read | Up to 1,000,000 IOPS |
| 4KB Random Write | Up to 1,000,000 IOPS |
| Terabytes Written (TBW) | 3.2PBW |
| MTBF | 1,800,000 hours |
| HeatSink | with HeatSink |
| Features | PCIe 4.0 NVMe high-performance Upgrade with full capacities up to 4096GB Compact M.2 2280 form factor Low profile graphene aluminum heat spreader |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | 0.36W Avg / 2.7W (MAX) Read / 10.2W (MAX) Write |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Vibration Resistance | Operating: 2.17G Peak (7-800Hz) Non-operating: 20G Peak (20-1000Hz) |
| Height | 3.50mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 9.70g |
| 배송 무게 | 0.04 kg |
| 포장 크기 | 183 × 130 × 8 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Yes. The low-profile graphene aluminum heat spreader keeps the drive at 3.50 mm height, which is within the standard M.2 2280 single-sided clearance.
It will run on PCIe 3.0 slots, but the 7000 MBps sequential and 1,000,000 IOPS random figures require a PCIe 4.0 x4 NVMe connection.
The 4 GB DRAM cache stores the NVMe mapping tables, which sustains the 7000 MBps write speed and 3.2 PBW endurance rating.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?