Lexar NM610 PRO 1TB M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
Lexar
500 GB NVMe drive with 2100 MB/s read and 1600 MB/s write speeds for fast boot and load times
Options 500GB NM610 PRO
The Lexar NM610 PRO is a 500GB internal SSD built in the M.2 2280 form factor. It uses 3D TLC NAND and connects through a PCIe 3.0 x4 lane with NVMe 1.3 support. The drive is made for consumer desktops and laptops that need faster storage than a SATA device can provide.
Sequential reads reach up to 2100 MBps and writes up to 1600 MBps, with random 4KB performance rated at 188,000 IOPS read and 156,000 IOPS write. Endurance is rated at 250TB total bytes written and the mean time between failures is 1,500,000 hours. If your workload demands higher sustained throughput or greater write endurance, this model will not be sufficient.
It suits PC enthusiasts upgrading from a SATA SSD who want a 3.5x speed boost for everyday tasks, gaming loads and content creation. The single-sided 2.25mm height fits most thin laptops and compact boards. Users needing PCIe 4.0 or 5.0 bandwidth, higher capacities or enterprise-grade endurance should look at a different drive.
| Brand | Lexar |
|---|---|
| Series | NM610 |
| Model | LNM610-500RBNA |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 500GB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 3.0 x4, NVMe |
| Max Sequential Read | Up to 2100 MBps |
| Max Sequential Write | Up to 1600 MBps |
| 4KB Random Read | Up to 188,000 IOPS |
| 4KB Random Write | Up to 156,000 IOPS |
| MTBF | 1,500,000 hours |
| Features | TBW: 250TB High-speed PCIe Gen3 x4 interface: 2100 MB/s read and 1600 MB/s write - NVMe 1.3 supported M.2 2280 form factor Get 3.5x the speed of a SATA-based SSD Ideal for PC enthusiasts 3D NAND Features LDPC (Low-Density Parity Check) Shock and vibration resistant with no moving parts |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G, duration 0.5 ms, Half Sine Wave |
| Max Vibration Resistance | 10~2000 Hz, 1.5mm, 20G, 1 Oct/min, 30 min/axis (X, Y, Z) |
| Height | 2.25mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 9.00g |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The 2100 MB/s sequential read figure lets the drive load large games, video projects or OS files noticeably faster than a SATA SSD, while the 1600 MB/s write speed keeps saves and exports moving quickly.
The PCIe 3.0 x4 link carries NVMe 1.3 traffic, so the drive reaches its rated 2100 MB/s read and 1600 MB/s write without being bottlenecked by the bus.
Yes, the 2280 length (80 mm), 22 mm width and 2.25 mm thickness match the standard M.2 slot found in most modern laptops and motherboards.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?