저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular 2.5 inch silver metal drive with label

Micron

Micron MTFDDAK1T9TGA-1BC1ZA 5400 PRO 1.92TB 2.5" SATA enterprise SSD

SKU CH-HCKT-TTNNC MPN MTFDDAK1T9TGA-1BC1ZA

Enterprise 2.5" SATA SSD storing 1.92 TB for always-on server workloads

  • Device TypeComputer Accessories
  • Used ForConsumer
  • Form Factor2.5"
  • Capacity1.92TB
  • InterfaceSATA III
  • ProtocolSATA
  • 92 TB capacity for large enterprise workloads
  • SATA 6 Gb/s interface for broad server compatibility
  • 5 inch 7 mm form factor fits standard drive bays
  • 1764 kg lightweight design eases rack installation
  • Micron 5400 PRO series built for mixed-use endurance

1.92 TB SATA Enterprise SSD

The Micron 5400 PRO is a 2.5 inch internal solid-state drive with a 1.92 TB capacity and a SATA 6 Gb/s interface. It is built for server and storage arrays that need consistent read performance in a 7 mm height form factor. The drive is supplied new and uses non-SED flash memory.

Suited for read-heavy server workloads

This drive fits administrators who want a SATA SSD for boot, logging or content-delivery roles where write endurance is secondary. Buyers who need hardware-based encryption or a self-encrypting drive should look at a different model. Systems limited to SATA II ports will not reach the drive's rated throughput.

SATA III interface and 7 mm height

The single specification that decides compatibility is the SATA III interface combined with the 7 mm (0.800) z-height. A bay or backplane must accept a 2.5 inch SATA device at that thickness, otherwise the drive will not install or operate.

주요 특징

  • 92 TB capacity for large enterprise workloads
  • SATA 6 Gb/s interface for broad server compatibility
  • 5 inch 7 mm form factor fits standard drive bays
  • 1764 kg lightweight design eases rack installation
  • Micron 5400 PRO series built for mixed-use endurance

사양

BrandMicron
ModelMTFDDAK1T9TGA-1BC1ZABYYR
Device TypeComputer Accessories
Used ForConsumer
Form Factor2.5"
Capacity1.92TB
InterfaceSATA III
ProtocolSATA
Height0.800
Width5.200
Weight0.1764
배송 무게0.23 kg
포장 크기229 × 102 × 51 mm

이 상품에 대한 질문

How do I install this 2.5" SATA SSD and what step is often missed?

Mount the 7 mm drive in a 2.5" bay using the four side screws, connect the SATA data cable to the motherboard and the SATA power cable from the PSU, then initialise the 1.92 TB volume in the OS disk manager — skipping initialisation leaves the drive invisible.

What maintenance or replacement will this Micron 5400 PRO need over time?

Enterprise SSDs have no moving parts to service; monitor SMART attributes for media wear and replace the drive once the endurance rating for the 1920 GB capacity is reached.

Which limit appears first during sustained writes on this SATA III drive?

The SATA 6 Gb/s interface bandwidth becomes the bottleneck before the internal NAND reaches its peak throughput during long sequential writes.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.