저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular black metal AT power supply unit with multiple cable connectors and cooling fan visible

myVolts

myVolts Bitcoin Miner 1800w Power Supply 110V-1600w 12V 8 GPUs

SKU CH-H67H-ZY788

AT power supply delivers 1800 W peak and 1600 W at 110 V to run eight GPUs with 90 % conversion efficiency and temperature-controlled fan

  • TypeAT
  • Delivers 1800 W peak for multi-GPU rigs
  • Operates at 1600 W continuous on 110 V mains
  • 90 % conversion rate cuts electricity waste
  • Temperature-controlled fan spins only above 50 °C
  • Includes SATA connectors for up to eight GPUs

Mining rig power supply

This 1800 W unit delivers up to 1600 W at 110 V and is built to feed eight graphics cards in a cryptocurrency mining rig. It accepts a wide input range from 100 V to 240 V and uses an AT form factor for compatibility with standard mining frames. The 12 V rail provides the bulk of the power needed for GPU-heavy workloads.

Thermals and noise

A temperature-controlled fan spins only when internal heat exceeds 50 degrees Celsius, ramping speed as temperature rises to keep noise low during lighter loads. The manufacturer claims a 90 % conversion rate, which reduces wasted energy and helps limit heat output under continuous operation. Firm cable seating is essential to avoid short-circuit risk.

Build integration

The unit includes eight SATA connectors and six-pin leads, though four-pin CPU and dual four-pin plugs are not supplied. An unused pin position on the interface is normal because the negative 5 V line has been omitted. Ensure your mining frame can accommodate an AT-style supply and that all GPU power cables match the available connectors.

주요 특징

  • Delivers 1800 W peak for multi-GPU rigs
  • Operates at 1600 W continuous on 110 V mains
  • 90 % conversion rate cuts electricity waste
  • Temperature-controlled fan spins only above 50 °C
  • Includes SATA connectors for up to eight GPUs

사양

TypeAT

이 상품에 대한 질문

How do I install the myVolts Bitcoin Miner 1800w PSU correctly and what is the step most people get wrong?

Connect every cable firmly to the mining machine's port before powering on; a loose link can cause a short circuit and fire risk, which is the step users most often rush.

What maintenance or replacement will this PSU need later?

The temperature-controlled fan only spins above 50 degrees Celsius, so plan to clean dust from the heatsink and verify fan operation periodically to maintain cooling performance.

What limit appears first under sustained heavy load on this unit?

At 110 V input the PSU delivers 1600 watts maximum, so the input-voltage power ceiling is the first constraint you will hit during continuous mining.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.