我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular black metal AT power supply unit with multiple cable connectors and cooling fan visible

myVolts

myVolts Bitcoin Miner 1800w Power Supply 110V-1600w 12V 8 GPUs

SKU CH-H67H-ZY788

AT power supply delivers 1800 W peak and 1600 W at 110 V to run eight GPUs with 90 % conversion efficiency and temperature-controlled fan

  • TypeAT
  • Delivers 1800 W peak for multi-GPU rigs
  • Operates at 1600 W continuous on 110 V mains
  • 90 % conversion rate cuts electricity waste
  • Temperature-controlled fan spins only above 50 °C
  • Includes SATA connectors for up to eight GPUs

Mining rig power supply

This 1800 W unit delivers up to 1600 W at 110 V and is built to feed eight graphics cards in a cryptocurrency mining rig. It accepts a wide input range from 100 V to 240 V and uses an AT form factor for compatibility with standard mining frames. The 12 V rail provides the bulk of the power needed for GPU-heavy workloads.

Thermals and noise

A temperature-controlled fan spins only when internal heat exceeds 50 degrees Celsius, ramping speed as temperature rises to keep noise low during lighter loads. The manufacturer claims a 90 % conversion rate, which reduces wasted energy and helps limit heat output under continuous operation. Firm cable seating is essential to avoid short-circuit risk.

Build integration

The unit includes eight SATA connectors and six-pin leads, though four-pin CPU and dual four-pin plugs are not supplied. An unused pin position on the interface is normal because the negative 5 V line has been omitted. Ensure your mining frame can accommodate an AT-style supply and that all GPU power cables match the available connectors.

商品特色

  • Delivers 1800 W peak for multi-GPU rigs
  • Operates at 1600 W continuous on 110 V mains
  • 90 % conversion rate cuts electricity waste
  • Temperature-controlled fan spins only above 50 °C
  • Includes SATA connectors for up to eight GPUs

商品規格

TypeAT

商品問答

How do I install the myVolts Bitcoin Miner 1800w PSU correctly and what is the step most people get wrong?

Connect every cable firmly to the mining machine's port before powering on; a loose link can cause a short circuit and fire risk, which is the step users most often rush.

What maintenance or replacement will this PSU need later?

The temperature-controlled fan only spins above 50 degrees Celsius, so plan to clean dust from the heatsink and verify fan operation periodically to maintain cooling performance.

What limit appears first under sustained heavy load on this unit?

At 110 V input the PSU delivers 1600 watts maximum, so the input-voltage power ceiling is the first constraint you will hit during continuous mining.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。