myVolts
myVolts Fanless ATX Power Module 16-24VDC 155x35x20mm
A fanless ATX power module accepting 16-24 VDC input and delivering 3.3 V, 5 V and 5 VSB rails with short-circuit and over-voltage protection
- TypeAT
- Fanless design keeps the system completely silent
- High-quality solid capacitors on the PCBA deliver long service life
- Tailored for mini-ITX motherboards with 24-pin ATX and 12 V AUX outputs
- Over-voltage protection shuts the output at 1.5× rated voltage
- circuit protection closes the output instantly on a fault
Fanless ATX Power Module
The myVolts Fanless ATX Power Module converts a 16 to 24 VDC input into standard ATX rails for mini ITX motherboards. It measures 155 by 35 by 20 millimetres and operates without a fan for completely silent running. Industrial-grade solid capacitors on the PCB are chosen for long service life.
Input range and protection limits
The module accepts 16 to 24 VDC and draws up to 12.0 A at 19 VDC with a surge rating of 12.0 A maximum. Over-voltage protection triggers at 1.5 times the rated output voltage, while short-circuit protection shuts the output down immediately. Typical efficiency is 85 percent or higher across the operating range.
Replaces noisy ATX PSUs in space-constrained builds
This unit replaces a conventional fan-cooled ATX supply where silence and a thin 20-millimetre profile are required. The jump is worthwhile for builders who need a compact DC-to-ATX solution with robust protection circuits. It is not suited for systems that demand higher peak currents than the 10.0 A on the 3.3 V rail or 6.0 A on the 5 V rail.
주요 특징
- Fanless design keeps the system completely silent
- High-quality solid capacitors on the PCBA deliver long service life
- Tailored for mini-ITX motherboards with 24-pin ATX and 12 V AUX outputs
- Over-voltage protection shuts the output at 1.5× rated voltage
- circuit protection closes the output instantly on a fault
사양
| Type | AT |
|---|
이 상품에 대한 질문
Which input voltage range should I match to my DC source?
The module accepts 16 VDC to 24 VDC input; typical draw is 12.0 A at 19 VDC with a 12.0 A surge limit at the same voltage.
What 3.3 V rail current can I expect under load?
The +3.30 V output delivers a typical 8.0 A and peaks at 10.0 A with ripple kept to 50 mV.
How does the 24-pin ATX connector limit the power I can draw?
The unit provides ATX-standard rails — +3.30 V up to 10.0 A peak, +5.00 V up to 6.0 A peak and +5.00 VSB up to 2.5 A peak — all within the 85 % efficiency rating.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.



