SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502069BTC
재고 있음
myVolts
myVolts LD-A160WL 12V 160W DC-ATX power supply
Direct-plug 12 V DC-ATX board delivers 160 W through ATX24, CPU4+4, SATA, IDE and DC5525 connectors with over-current and short-circuit protection
- TypeAT
- Direct motherboard power via 24-pin ATX connector eliminates 24 wires
- Compact design fits ITX and HTPC cases while delivering 160 W
- Overcurrent protection shuts down output when maximum current is reached
- circuit protection turns off power instantly during a fault
- Multiple rails provide +5 VSB at 2 A, +5 V at 6 A, +3.3 V at 6 A, +12 V at 8 A
Compact DC-ATX board for 12 V systems
The myVolts LD-A160WL plugs straight into a 24-pin ATX socket and delivers 160 W from a single 12 V source. It removes the bulk of a standard PSU and the tangle of 24 wires, making it a tidy fit for thin Mini-ITX builds, HTPC cases or embedded appliances.
Suited to space-constrained 12 V builds.
Builders powering a low-draw board from a 12 V brick or battery will appreciate the direct ATX connection and short cables. Systems that require mains input, higher wattage or multiple PCIe power connectors must use a conventional ATX supply instead.
160 W total from a 12 V DC input
The board accepts 12 V and regulates five rails: +12 V at 8 A, +5 V at 6 A, +3.3 V at 6 A, +5 VSB at 2 A and -12 V at 0.15 A. Over-current and short-circuit protection shut the outputs down when limits are exceeded.
주요 특징
- Direct motherboard power via 24-pin ATX connector eliminates 24 wires
- Compact design fits ITX and HTPC cases while delivering 160 W
- Overcurrent protection shuts down output when maximum current is reached
- circuit protection turns off power instantly during a fault
- Multiple rails provide +5 VSB at 2 A, +5 V at 6 A, +3.3 V at 6 A, +12 V at 8 A
사양
| Type | AT |
|---|
이 상품에 대한 질문
What comes in the box and what else is needed to run the LD-A160WL?
The box includes the board with ATX 24-pin, CPU 4+4-pin, SATA, IDE and DC 5525 connectors plus cables up to 320 mm. You must supply a 12V DC source such as an external brick or battery.
How do I pick between the listed voltage rails for my build?
The board delivers fixed rails of +12V/8A, +5V/6A, +3.3V/6A, +5VSB/2A and -12V/0.15A simultaneously; choose a 12V source that can provide at least 160W total.
What does the 160W rating mean once the board is installed in a Mini-ITX or HTPC system?
It is the combined maximum output across all rails; the +12V rail supplies up to 8A, the +5V and +3.3V rails each supply up to 6A, and the +5VSB rail supplies up to 2A, with over-current and short-circuit shutdown.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
