myVolts
myVolts S-48-24 24V 2A 48W power supply
Compact aluminium switch-mode unit delivers 24 V at 2 A (48 W) with overload, over-voltage and short-circuit protection for industrial, LED and 3D-printer use
- TypeAT
- High efficiency with low DC ripple for stable output
- Built-in short-circuit, overload and overvoltage protection
- 100 % full-load burn-in test confirms reliable operation
- Compact aluminium-alloy chassis measuring 85 x 58 x 33 mm with natural cooling
- Wide AC 100-240 V input suits global mains supplies
Industrial 24 V power supply
The myVolts S-48-24 is a 48 W switch-mode unit that delivers 24 V at 2 A from a 100-240 V AC input. Its aluminium alloy case measures 85 x 58 x 33 mm and relies on natural convection for cooling. The supply suits industrial automation, LED displays, CCTV, 3D printers and similar engineering tasks.
Replaces open-frame or enclosed linear units
Builders moving from larger linear supplies gain a smaller footprint and lower operating temperature. The jump is worthwhile when space is limited, when 0-40 °C ambient operation is required, or when CCC, FCC and CE marks are needed for compliance. The 100 % burn-in test adds confidence for continuous duty.
Limited to 48 W and fixed 24 V output
The ADJ terminal allows only minor voltage trimming, not a wide range. Overload, over-voltage and short-circuit protection shut the unit down rather than fold back current. Natural convection demands free airflow around the 33 mm height; sealed enclosures above 40 °C or loads above 2 A will exceed the design limits.
주요 특징
- High efficiency with low DC ripple for stable output
- Built-in short-circuit, overload and overvoltage protection
- 100 % full-load burn-in test confirms reliable operation
- Compact aluminium-alloy chassis measuring 85 x 58 x 33 mm with natural cooling
- Wide AC 100-240 V input suits global mains supplies
사양
| Type | AT |
|---|
이 상품에 대한 질문
What are the exact mounting dimensions for the 85 x 58 x 33 mm aluminum alloy case?
The supply measures 85 mm long, 58 mm wide and 33 mm high, with a natural-cooling aluminium chassis that fits standard DIN-rail or panel cut-outs matching those centres.
Which terminals do I wire for AC input and DC output, and what is the common polarity mistake?
Connect live and neutral to the L and N pins for 100-240 V AC; the V terminal is +24 V and GND is 0 V — reversing V and GND is the frequent error that triggers the short-circuit protection.
When should I plan to replace the electrolytic capacitors inside this 48 W unit?
At the rated 0-40 °C operating range the capacitors typically last several years; expect shorter life if the supply runs continuously near 40 °C or in 95 % humidity, so schedule a preventive swap after 3-5 years in harsh environments.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.



