저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 1.5TB 16x96GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM H13DSH memory upgrade

SKU CH-EDCQ-F3HZK

1.5 TB kit of 16 DDR5 96 GB registered ECC RDIMMs at 4800 MT/s, CL40, 1.1 V, validated for the Supermicro H13DSH motherboard

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 5 TB capacity across 16 modules of 96 GB each
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC RDIMM architecture for full-slot stability
  • 288-pin 2Rx4 form factor matched to Supermicro H13DSH
  • Major OEM Samsung, Micron or Hynix chips for enterprise reliability

System-specific DDR5 server memory kit

This NEMIX RAM kit provides 1.5 TB of DDR5-4800 registered ECC memory in a 16-module configuration of 96 GB each. It is built for the Supermicro H13DSH motherboard and matches the exact rank, voltage and timing the platform expects.

Sustained-load behaviour with registered ECC

Registered architecture buffers the address and command signals so all 16 slots can run fully populated at the rated 4800 MT/s without overloading the memory controller. On-die ECC detects and corrects single-bit errors during continuous operation, preventing silent data corruption that would otherwise cause unplanned downtime.

Pre-installation checks for the H13DSH platform

Verify the motherboard manual for approved DIMM population order, maximum supported capacity per socket and any BIOS version requirements before ordering. The 288-pin RDIMM form factor is mandatory; UDIMM or SODIMM modules will not fit and the kit will not function in platforms that require a different memory type.

주요 특징

  • 5 TB capacity across 16 modules of 96 GB each
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC RDIMM architecture for full-slot stability
  • 288-pin 2Rx4 form factor matched to Supermicro H13DSH
  • Major OEM Samsung, Micron or Hynix chips for enterprise reliability

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How much power does the 1.5TB kit draw when the server runs continuously?

Each 96GB module operates at 1.1V, so the full 16-DIMM kit runs at that voltage; total wattage depends on the Supermicro H13DSH memory controller load.

What motherboard and CPU combination must I already have for this 16x96GB kit to function?

The kit is validated for the Supermicro H13DSH motherboard; you need a compatible CPU that supports DDR5-4800 Registered ECC RDIMMs and 16 populated slots.

Can I mix these 2Rx4 CL40 RDIMMs with existing DDR5 modules of different rank or latency on the H13DSH?

The H13DSH memory population rules require matching rank, voltage and timing across all slots; mixing different 2Rx4 CL40 1.1V modules may prevent the full 1.5TB from being recognised.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.