We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.5TB 16x96GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM H13DSH memory upgrade

SKU CH-EDCQ-F3HZK

1.5 TB kit of 16 DDR5 96 GB registered ECC RDIMMs at 4800 MT/s, CL40, 1.1 V, validated for the Supermicro H13DSH motherboard

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.5TB 16X96GB

Show 30 more configurations
  • 5 TB capacity across 16 modules of 96 GB each
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC RDIMM architecture for full-slot stability
  • 288-pin 2Rx4 form factor matched to Supermicro H13DSH
  • Major OEM Samsung, Micron or Hynix chips for enterprise reliability

System-specific DDR5 server memory kit

This NEMIX RAM kit provides 1.5 TB of DDR5-4800 registered ECC memory in a 16-module configuration of 96 GB each. It is built for the Supermicro H13DSH motherboard and matches the exact rank, voltage and timing the platform expects.

Sustained-load behaviour with registered ECC

Registered architecture buffers the address and command signals so all 16 slots can run fully populated at the rated 4800 MT/s without overloading the memory controller. On-die ECC detects and corrects single-bit errors during continuous operation, preventing silent data corruption that would otherwise cause unplanned downtime.

Pre-installation checks for the H13DSH platform

Verify the motherboard manual for approved DIMM population order, maximum supported capacity per socket and any BIOS version requirements before ordering. The 288-pin RDIMM form factor is mandatory; UDIMM or SODIMM modules will not fit and the kit will not function in platforms that require a different memory type.

Highlights

  • 5 TB capacity across 16 modules of 96 GB each
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC RDIMM architecture for full-slot stability
  • 288-pin 2Rx4 form factor matched to Supermicro H13DSH
  • Major OEM Samsung, Micron or Hynix chips for enterprise reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.5TB kit draw when the server runs continuously?

Each 96GB module operates at 1.1V, so the full 16-DIMM kit runs at that voltage; total wattage depends on the Supermicro H13DSH memory controller load.

What motherboard and CPU combination must I already have for this 16x96GB kit to function?

The kit is validated for the Supermicro H13DSH motherboard; you need a compatible CPU that supports DDR5-4800 Registered ECC RDIMMs and 16 populated slots.

Can I mix these 2Rx4 CL40 RDIMMs with existing DDR5 modules of different rank or latency on the H13DSH?

The H13DSH memory population rules require matching rank, voltage and timing across all slots; mixing different 2Rx4 CL40 1.1V modules may prevent the full 1.5TB from being recognised.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.